Culture

How can we make sure people get the second COVID-19 vaccine dose?

The light at the end of the pandemic tunnel is getting brighter. This week, the first health care workers will receive the first doses of an FDA-approved coronavirus vaccine. Soon, so will other front-line workers in health care and beyond, and residents of long-term care facilities.

The availability of COVID-19 vaccines, however, will not necessarily result in people getting fully vaccinated.

For the first vaccines that will reach the public, everyone who gets a first dose must have a second dose within a few weeks to get full protection against severe COVID-19.

While Mark Fendrick, M.D. hails the rapid development of vaccines as a scientific breakthrough, he is anxious.

For decades, the University of Michigan primary care physician and researcher has studied what it takes to make sure that Americans get the essential preventive services that can help them stay healthy.

So what's his worry?

"There are several factors and behaviors that prevent many well-intentioned people from completing a two-step process, like that recommended for the COVID-19 vaccines," he says. "We need to provide everything necessary to support those who receive the first shot to make sure they complete their second dose."

This lack of completion has been well established for other two-dose vaccines, like those that prevent less contagious and less lethal conditions, such as shingles, human papilloma virus (HPV), and hepatitis B. Fendrick worked on studies of the latter vaccine early in his career.

"On the positive side, out-of-pocket costs - one of the most significant barriers for vaccine uptake -- has been removed for COVID-19 vaccines, thanks to federal action," says Fendrick, a general internist at Michigan Medicine and director of the Center for Value-Based Insurance Design, which has fostered research and policy initiatives to enhance access to preventive care.

"But vaccines that require more than one dose create additional behavioral and environmental challenges, including reports of side effects, false claims regarding vaccine safety, logistical barriers, and the politicization of the program, that may deter people from getting vaccinated or returning for their second dose," he says. "Studies of other high-value vaccines and medications to manage chronic conditions show that even when provided at no cost, patients take them half the time."

What might help?

Vaccination kits will include a card that health providers can distribute when giving first doses, to help educate patients about the vaccine and to encourage the pre-scheduling of second-dose appointments.

While useful, Fendrick has advocated that a smartphone-based vaccine adherence support program, built on research by his team and others, be added to optimize vaccine uptake.

"We have the technology," he points out. "Smartphone apps and wearables already succeed in getting people to take their medicine, check their blood pressure or blood sugar, or even measure their heart rhythm."

Beyond automated reminders, a quick call or email from someone at a trusted source could do wonders, he says.

"Just knowing that someone cares and is willing to reach out has worked wonders in getting more people engaged in their health care behaviors," says Fendrick. "This is particularly true for under-served groups that are at the greatest risk from COVID-19, like the elderly, and those with low incomes and without stable housing."

The tailored messaging elements of a COVID-19 vaccine support program would include:

Education about how the vaccine works

Information about vaccine side effects and their treatment

Scheduling and reminders of second dose appointment

Updates and easily understandable and accessible information to dispel misinformation and rumors that could give someone doubts about getting a second dose

Transportation options to second dose appointment

This last one is especially crucial, Fendrick notes. Lack of access to transportation has stood in the way of other preventive health services. Making sure that people know where to turn if they need help to get to their second-dose appointment, and making it possible for them to get the second dose at a convenient location, will be critical.

"Given the enormous stakes, we should aim for the same high level of customer service used the most effective online retailers, where they regularly check in after you visit their site and buy something," Fendrick says. "They know what works to make consumers feel appreciated. This same personalized approach should be used to let each person who needs to return for a second vaccine dose feel like the most important person in the world - which, in my opinion, they are."

What about cash incentives?

In addition to customized messaging, Fendrick feels that small financial rewards like a $50 gift card would further increase vaccine uptake.

While some experts have suggested paying people to get the first vaccine dose, Fendrick lands on the side of enrolling people in a no cost adherence support program after they receive their first dose, and but paying the financial reward after they complete the two-dose regimen.

"We need to focus the rewards for those who have made the effort to get both doses and for fulfilling their broader societal role in reducing the disease's impact."

What can providers and employers do?

Having surmounted incredible hurdles to develop, test, produce and distribute the vaccines, hospitals, clinics, pharmacies and state and local health agencies are making a similarly massive push to get the vaccine to everyone who can take it.

Employers, who have a big stake in the ability of their employees to avoid COVID-19 and safely return to work, may also want to consider offering support programs that include monetary incentives or other perks such as a charitable donation to encourage full vaccination.

Whether or not the vaccine is mandated, this would reward employees for reducing the spread of the virus and contributing to the opening of the economy.

Those who administer the vaccine also play a key role to make sure people complete the two-shot regimen.

"The good news is that the federal government has put in place a financial incentive for those who dispense the vaccine by paying a higher reimbursement rate for the second dose than for the first," Fendrick says. "Why not also give incentives to patients?"

Fendrick has long supported the idea of aligning patient- and provider-focused tactics to increase use of essential medical care.

Published research has shown that when both patient and provider are given incentives to complete a specific behavior, like taking medicines to lower cholesterol, the impact is greater than the individual parts. He is quite confident that alignment of incentives will result in higher vaccine uptake.

"We can't let the last leg of the remarkable COVID-19 vaccine journey - the second-dose problem - stop us from completing this quest to end the worst pandemic in modern history," Fendrick says. "We've gone 98 yards down the field in record time. We have to do everything possible get over the goal line, so we can all get our lives back."

Credit: 
Michigan Medicine - University of Michigan

USC study: Young adults who identify as Republicans eschew COVID safety precautions

Young Californians who identify themselves as Republicans are less likely to follow social distancing guidelines that prevent coronavirus transmission than those who identify as Democrats or Independents, according to new USC study published today in JAMA Internal Medicine.

The findings among 18- to 25-year-olds mirror what many have observed about America's politicized response to COVID-19, and are a source of alarm for public health experts. The United States is now averaging 207,000 new cases and 2,319 deaths per day, as of Friday.

"You might expect middle-aged or older adults to have established ideologies that affect their health behavior, but to see it in young adults who have historically been less politically inclined is unexpected," said Adam Leventhal, director of the USC Institute for Addiction Science. "Regardless of age, we would never hope to find results like this. Public health practices should not correlate with politics."

The study was conducted during the summer of 2020 via an online survey that was completed by 2,065 18- to 25-year-olds living predominately in Los Angeles County. The participants were initially recruited as ninth-grade high school students as part of the USC Happiness & Health Project, which has been surveying this group about their health behaviors every six months since 2013.

Of the young adults contacted, 891 identified as Democrat, 148 as Republican, 320 as "Independent or Other," and 706 declined to answer or said they didn't know what political party they identify with.

Researchers found that 24.3% of Republican young adults said they don't frequently social distance from others, compared with just 5.2% of Democrats.

Differences in social distancing practices were also found when Republicans were compared to Independents and young adults who did not report a political party affiliation. Researchers discovered that Republicans versus other groups were more likely to visit public indoor venues such as malls, restaurants, bars or clubs, or attend or host parties with 10 people or more.

Throughout most of the COVID-19 pandemic, California has recommended that all residents practice social distancing and wear a mask when outside the home. Current restrictions prohibit private gatherings of any size.

Leventhal noted that when his team statistically adjusted for 21 factors that could explain the difference in social distancing across political party groups, including propensity for risk-taking behaviors, Republicans were 4 times more likely than the others to be infrequent social distancers.

He also said that the "blue county within a blue state" setting for the study underscores that the link between political party affiliation and social distancing cannot simply be reduced to an issue of urban vs. rural differences.

Credit: 
University of Southern California

One-step method to generate mice for vaccine research

BOSTON -- To develop vaccines and investigate human immune responses, scientists rely on a variety of animal models, including mice that can produce human antibodies through genetically engineered B cell receptors, which are specialized antibodies bound to the B cell membrane. These mice, however, often take several years to develop, requiring a complicated process of genetic modification and careful breeding.

"The time it takes to generate these specialized mice has been a major factor in delaying vaccine development," says Facundo Batista, PhD, associate director of the Ragon Institute of MGH, MIT and Harvard. "With the recent advances in gene editing technology like CRISPR/Cas9, we knew there had to be a way to speed up this process significantly."

Batista's group has developed a new method for generating mouse lines for pre-clinical vaccine evaluation that dramatically shortens this timeline. In a study published recently in the journal EMBO, this one-step method, which uses CRISPR/Cas9 technology, can produce mice with genetically engineered human B cell receptors in just a few weeks.

To test this technology, the researchers engineered mice to have human B cell receptors that are precursors to what are called broadly neutralizing HIV antibodies. These antibodies are known to be effective in combating HIV, but they are difficult to stimulate through vaccination. The precursors responded to an antigen currently being used in clinical HIV trials by generating broadly neutralizing antibody-like mutations. The ability to quickly evaluate the ability of different antigens to active these precursors has the potential to significantly accelerate vaccine development.

The engineered B cells were not just capable of making high-quality antibodies; some became a specialized form of B cell known as memory B cells, which are used to maintain long-lasting immunity once antibodies are produced against a pathogen. This means the mice can likely be used to quickly validate good candidate vaccines for HIV and other pathogens.

"This new technique may allow scientists studying vaccines and antibody evolution to tremendously speed up their research," says Ragon research fellow Xuesong Wang, PhD, co-first author on the paper.

Rashmi Ray, PhD, also co-first author and a Ragon research fellow, agrees: "It will allow researchers to respond much more quickly and flexibly to new developments in the field."

Credit: 
Massachusetts General Hospital

Sheets of carbon nanotubes come in a rainbow of colors

image: Esko Kauppinen is a professor of applied physics at Aalto University.

Image: 
Photo courtesy of Aalto University

HOUSTON - (Dec. 14, 2020) - Nanomaterials researchers in Finland, the United States and China have created a color atlas for 466 unique varieties of single-walled carbon nanotubes.

The nanotube color atlas is detailed in a study in Advanced Materials about a new method to predict the specific colors of thin films made by combining any of the 466 varieties. The research was conducted by researchers from Aalto University in Finland, Rice University and Peking University in China.

"Carbon, which we see as black, can appear transparent or take on any color of the rainbow," said Aalto physicist Esko Kauppinen, the corresponding author of the study. "The sheet appears black if light is completely absorbed by carbon nanotubes in the sheet. If less than about half of the light is absorbed in the nanotubes, the sheet looks transparent. When the atomic structure of the nanotubes causes only certain colors of light, or wavelengths, to be absorbed, the wavelengths that are not absorbed are reflected as visible colors."

Carbon nanotubes are long, hollow carbon molecules, similar in shape to a garden hose but with sides just one atom thick and diameters about 50,000 times smaller than a human hair. The outer walls of nanotubes are made of rolled graphene. And the wrapping angle of the graphene can vary, much like the angle of a roll of holiday gift wrap paper. If the gift wrap is rolled carefully, at zero angle, the ends of the paper will align with each side of the gift wrap tube. If the paper is wound carelessly, at an angle, the paper will overhang on one end of the tube.

The atomic structure and electronic behavior of each carbon nanotube is dictated by its wrapping angle, or chirality, and its diameter. The two traits are represented in a "(n,m)" numbering system that catalogs 466 varieties of nanotubes, each with a characteristic combination of chirality and diameter. Each (n,m) type of nanotube has a characteristic color.

Kauppinen's research group has studied carbon nanotubes and nanotube thin films for years, and it previously succeeded in mastering the fabrication of colored nanotube thin films that appeared green, brown and silver-grey.

In the new study, Kauppinen's team examined the relationship between the spectrum of absorbed light and the visual color of various thicknesses of dry nanotube films and developed a quantitative model that can unambiguously identify the coloration mechanism for nanotube films and predict the specific colors of films that combine tubes with different inherent colors and (n,m) designations.

Rice engineer and physicist Junichiro Kono, whose lab solved the mystery of colorful armchair nanotubes in 2012, provided films made solely of (6,5) nanotubes that were used to calibrate and verify the Aalto model. Researchers from Aalto and Peking universities used the model to calculate the absorption of the Rice film and its visual color. Experiments showed that the measured color of the film corresponded quite closely to the color forecast by the model.

The Aalto model shows that the thickness of a nanotube film, as well as the color of nanotubes it contains, affects the film's absorption of light. Aalto's atlas of 466 colors of nanotube films comes from combining different tubes. The research showed that the thinnest and most colorful tubes affect visible light more than those with larger diameters and faded colors.

"Esko's group did an excellent job in theoretically explaining the colors, quantitatively, which really differentiates this work from previous studies on nanotube fluorescence and coloration," Kono said.

Since 2013, Kono's lab has pioneered a method for making highly ordered 2D nanotube films. Kono said he had hoped to supply Kauppinen's team with highly ordered 2D crystalline films of nanotubes of a single chirality.

"That was the original idea, but unfortunately, we did not have appropriate single-chirality aligned films at that time," Kono said. "In the future, our collaboration plans to extend this work to study polarization-dependent colors in highly ordered 2D crystalline films."

The experimental method the Aalto researchers used to grow nanotubes for their films was the same as in their previous studies: Nanotubes grow from carbon monoxide gas and iron catalysts in a reactor that is heated to more than 850 degrees Celsius. The growth of nanotubes with different colors and (n,m) designations is regulated with the help of carbon dioxide that is added to the reactor.

"Since the previous study, we have pondered how we might explain the emergence of the colors of the nanotubes," said Nan Wei, an assistant research professor at Peking University who previously worked as a postdoctoral researcher at Aalto. "Of the allotropes of carbon, graphite and charcoal are black, and pure diamonds are colorless to the human eye. However, now we noticed that single-walled carbon nanotubes can take on any color: for example, red, blue, green or brown."

Kauppinen said colored thin films of nanotubes are pliable and ductile and could be useful in colored electronics structures and in solar cells.

"The color of a screen could be modified with the help of a tactile sensor in mobile phones, other touch screens or on top of window glass, for example," he said.

Kauppinen said the research can also provide a foundation for new kinds of environmentally friendly dyes.

Credit: 
Rice University

Artificial intelligence sets sights on the sun

image: Solar observations with image quality decreasing from left to right

Image: 
Kanzelhöhe Observatory for Solar and Environmental Research, Austria.

Scientists from the University of Graz and the Kanzelhöhe Solar Observatory (Austria) and their colleagues from the Skolkovo Institute of Science and Technology (Skoltech) developed a new method based on deep learning for stable classification and quantification of image quality in ground-based full-disk solar images. The research results were published in the journal Astronomy & Astrophysics and are available in open access.

The Sun is the only star where we can discern surface details and study plasma under extreme conditions. The solar surface and atmospheric layers are strongly influenced by the emerging magnetic field. Features such as sunspots, filaments, coronal loops, and plage regions are a direct consequence of the distribution of enhanced magnetic fields on the Sun, which challenges our current understanding of these phenomena. Solar flares and coronal mass ejections result from a sudden release of free magnetic energy stored in the strong fields associated with sunspots. They are the most energetic events in our solar system and have a direct impact on the Sun-Earth system called "space weather". Modern society strongly relies on space and ground-based technology which is highly vulnerable to hazardous space weather events. Continuous monitoring of the Sun is essential for better understanding and predicting solar phenomena and the interaction of solar eruptions with the Earth's magnetosphere and atmosphere. In recent decades, solar physics has entered the era of big data, and the large amounts of data constantly produced by ground- and space-based observatories can no longer be analyzed by human observers alone.

Ground-based telescopes are positioned around the globe to provide continuous monitoring of the Sun independently of the day-night schedule and local weather conditions. Earth's atmosphere imposes the strongest limitations on solar observations since clouds can occult the solar disk and air fluctuations can cause image blurring. In order to select the best images from multiple simultaneous observations and detect local quality degradations, objective image quality assessment is required.

"As humans, we assess the quality of a real image by comparing it to an ideal reference image of the Sun. For instance, an image with a cloud in front of the solar disk ? a major deviation from our imaginary perfect image ? would be tagged as a very low-quality image, while minor fluctuations are not that critical when it comes to quality. Conventional quality metrics struggle to provide a quality score independent of solar features and typically do not account for clouds," says Tatiana Podladchikova, an assistant professor at the Skoltech Space Center (SSC) and a research co-author.

In their recent study, the researchers used artificial intelligence (AI) to achieve quality assessment that is similar to human interpretation. They employed a neural network to learn the characteristics of high-quality images and estimate the deviation of real observations from an ideal reference.

The paper describes an approach based on Generative Adversarial Networks (GAN) that are commonly used to obtain synthetic images, for example, to generate realistic human faces or translate street maps into satellite images. This is achieved by approximating the distribution of real images and picking samples from it. The content of the generated image can be either random or defined by a conditional description of the image. The scientists used the GAN to generate high-quality images from the content description of the same image: the network first extracted the important characteristics of the high-quality image, such as the position and appearance of solar features, and then generated the original image from this compressed description. When this procedure is applied to lower quality images, the network re-encodes the image content, while omitting low-quality features in the reconstructed image. This is a consequence of the approximated image distribution by the GAN which can only generate images of high quality. The difference between a low-quality image and the envisioned high-quality reference of the neural network provides the basis for an image quality metric and is used to identify the position of quality degrading effects in the image.

"In our study, we applied the method to observations from the Kanzelhöhe Observatory for Solar and Environmental Research and showed that it agrees with human observations in 98.5% of cases. From the application to unfiltered full observing days, we found that the neural network correctly identifies all strong quality degradations and allows us to select the best images, which results in a more reliable observation series. This is also important for future network telescopes, where observations from multiple sites need to be filtered and combined in real-time," says Robert Jarolim, a research scientist at the University of Graz and the first author of the study.

"In the 17th century, Galileo Galilei was the first to dare look at the Sun through his telescope, while in the 21st century, dozens of space and ground observatories continuously track the Sun, providing us with a wealth of solar data. With the launch of the Solar Dynamics Observatory (SDO) 10 years ago, the amount of solar data and images transmitted to Earth soared to 1.5 terabytes per day, which is equivalent to downloading half a million songs daily. The Daniel K. Inouye Solar Telescope, the world's largest ground-based solar telescope with a 4-meter aperture, took the first detailed images of the Sun in December 2019 and is expected to provide six petabytes of data per year. Solar data delivery is the biggest project of our times in terms of total information produced. With the recent launches of groundbreaking solar missions, Parker Solar Probe and Solar Orbiter, we will be getting ever-increasing amounts of data offering new valuable insights. There are no beaten paths in our research. With so much new information coming in daily, we simply must invent novel efficient AI-aided data processing methods to deal with the biggest challenges facing humankind. And whatever storms may rage, we wish everyone good weather in space," Podladchikova says.

The new method was developed with the support of Skoltech's high-performance cluster for the anticipated Solar Physics Research Integrated Network Group (SPRING) that will provide autonomous monitoring of the Sun using cutting-edge technology of observational solar physics. SPRING is pursued within the SOLARNET project, which is dedicated to the European Solar Telescope (EST) initiative supported by the EU research and innovation funding program Horizon 2020. Skoltech represents Russia in the SOLARNET consortium of 35 international partners.

Currently, the authors are further elaborating their image processing methods to provide a continuous data stream of the highest possible quality and developing automated detection software for continuous tracking of solar activity.

Credit: 
Skolkovo Institute of Science and Technology (Skoltech)

Chance played a major role in keeping Earth fit for life

A study by the University of Southampton gives a new perspective on why our planet has managed to stay habitable for billions of years - concluding it is almost certainly due, at least in part, to luck. The research suggests this may lengthen the odds of finding life on so-called 'twin-Earths' in the Universe.

The research, published in the Nature journal Communications Earth & Environment, involved conducting the first ever simulation of climate evolution on thousands of randomly generated planets.

Geological data demonstrate that Earth's climate has remained continuously habitable for more than three billion years. However, it has been precariously balanced, with the potential to rapidly deteriorate to deep-frozen or intolerably hot conditions causing planet-wide sterility.

Professor Toby Tyrrell, a specialist in Earth System Science at the University of Southampton, explains: "A continuously stable and habitable climate on Earth is quite puzzling. Our neighbours, Mars and Venus, do not have habitable temperatures, even though Mars once did. Earth not only has a habitable temperature today, but has kept this at all times across three to four billion years - an extraordinary span of geological time."

Many events can threaten the continuous stability of a planet - asteroid impacts, solar flares and major geological events, such as eruptions of supervolcanoes. Indeed, an asteroid which hit the Earth 66 million years ago caused the extinction of more than 75 per cent of all species, killing off the dinosaurs along with many other species.

Previous computer modelling work on Earth habitability has involved modelling a single planet: Earth. But, inspired by discoveries of exoplanets (those outside of our solar system) that reveal that there are billions of Earth-like planets in our galaxy alone, a Southampton scientist took a novel approach to investigating a big question: what has led Earth to remain life-sustaining for so long?

To explore this, Professor Tyrrell tapped into the power of the University of Southampton's Iridis supercomputing facility to run simulations looking at how 100,000 randomly different planets responded to random climate-altering events spread out across three billion years, until they reached a point where they lost their habitability. Each planet was simulated 100 times, with different random events each time.

Having accrued a vast set of results, he then looked to see whether habitability persistence was restricted to just a few planets which were always capable of sustaining life for three billion years, or instead was spread around many different planets, each of which only sometimes stayed habitable for this period.

The results of the simulation were very clear. Most of those planets which remained life-sustaining throughout the three billion year period only had a probability, not a certainty, of staying habitable. Many instances were of planets which usually failed in the simulations and only occasionally remained habitable. Out of a total population of 100,000 planets, nine percent (8,700) were successful at least once - of those, nearly all (about 8,000) were successful fewer than 50 times out of 100 and most (about 4,500) were successful fewer than 10 times out of 100.

The study results suggest chance is a major factor in determining whether planets, such as Earth, can continue to nurture life over billions of years. Professor Tyrrell concludes: "We can now understand that Earth stayed suitable for life for so long due, at least in part, to luck. For instance, if a slightly larger asteroid had hit Earth, or had done so at a different time, then Earth may have lost its habitability altogether.

"To put it another way, if an intelligent observer had been present on the early Earth as life first evolved, and was able to calculate the chances of the planet staying habitable for the next several billion years, the calculation may well have revealed very poor odds."

Given these seemingly poor odds, the study speculates that elsewhere in the Universe there should be Earth-like planets which had similar initial prospects but which, due to chance events, at one point became too hot or too cold and consequently lost the life upon them. As techniques to investigate exoplanets improve, and what seem at first to be 'twin Earths' are discovered and analysed, it seems likely that most will be found to be uninhabitable.

Credit: 
University of Southampton

Create a realistic VR experience using a normal 360-degree camera

video: Animation explaining Omniphotos.

Image: 
Christian Richardt

Scientists at the University of Bath have developed a quick and easy approach for capturing 360° VR photography without using expensive specialist cameras. The system uses a commercially available 360° camera on a rotating selfie stick to capture video footage and create an immersive VR experience.

Virtual reality headsets are becoming increasingly popular for gaming, and with the global pandemic restricting our ability to travel, this system could also be a cheap and easy way to create virtual tours for tourist destinations.

Conventional 360° photography stitches together thousands of shots as you move around one spot. However, it doesn't retain depth perception, so the scene is distorted and the images look flat.

Whilst state-of-the-art VR photography, which includes depth perception, is available to professional photographers, it requires expensive equipment, as well as time to process the thousands of photos needed to create a fully immersive VR environment.

Dr Christian Richardt and his team at CAMERA, the University of Bath's motion capture research centre, have created a new type of 360° VR photography accessible to amateur photographers called OmniPhotos.

This is a fast, easy and robust system that recreates high quality motion parallax, so that as the VR user moves their head, the objects in the foreground move faster than the background.

This mimics how your eyes view the real world, creating a more immersive experience.

OmniPhotos can be captured quickly and easily using a commercially available 360° video camera on a rotating selfie stick.

Using a 360° video camera also unlocks a significantly larger range of head motions.

OmniPhotos are built on an image-based representation, with optical flow and scene adaptive geometry reconstruction, which is tailored for real time 360° VR rendering.

Dr Richardt and his team presented the new system at the international SIGGRAPH Asia conference on Sunday 13th December 2020.

He said: "Until now, VR photography that uses realistic motion parallax has been the preserve of professional VR photographers, using expensive equipment and requiring complex software and computing power to process the images.

"OmniPhotos simplifies this process so that you can use it with a commercially available 360° camera that only costs a few hundred pounds.

"This opens up VR photography to a whole new set of applications, from estate agent's virtual tours of houses to immersive VR journeys at remote tourist destinations. With the pandemic stopping many people from travelling on holiday this year, this is a way of virtually visiting places that are currently inaccessible."

Credit: 
University of Bath

International research project investigates photosensitive carbon nanoparticles

An international team of researchers, including researchers from Friedrich-Alexander Universität Erlangen-Nürnberg (FAU) headed by Prof. Dr. Dirk M. Guldi have now managed to identify the fundamental problems relating to the photophysics and photochemistry of carbon nanocolloids (CNC), and ascertain possible approaches for research into these readily available, non-toxic and adaptable nanomaterials.

Light is not only the primary source of energy for life on Earth, it is also hugely important for a number of technical applications. Nanomaterials such as carbon nanocolloids (CNC) which can be used to tailor light-material interactions will have an important role to play in the technology of the future. As a sustainable product, they will help to avoid toxic waste and excessive consumption of resources. However, their range of application has been rather limited to date as their heterogenity hindered researchers in their attempts to find a uniform way of describing CNCs in an excited state. An international team of researchers, including researchers from FAU headed by Prof. Dr. Dirk M. Guldi from the Chair of Physical Chemistry I have now managed to identify the fundamental problems relating to the photophysics and photochemistry of carbon nanocolloids (CNC), and ascertain possible approaches for research into these readily available, non-toxic and adaptable nanomaterials. The researchers have published their results in the journal Chem, in an article titled 'Optical processes in carbon nanocolloids'.

Carbon nanocolloids are highly heterogeneous materials. They are tiny carbon-based particles of less than 10 nanometres in diameter. The lack of a common description of their properties in an excited state makes it difficult for them to be used in technological, ecological and biomedical applications. However, one of their most interesting features is their photoluminescence, in other words the emission of light after the absorption of photons, which make them a promising candidate for technological or biomedical applications. The researchers believe that adding a solution will encourage the luminescence of CNC after irradiation, a process also known as phosphoresence. The findings of the international team will serve as the starting point for making CNCs available for technological applications.

Credit: 
Friedrich-Alexander-Universität Erlangen-Nürnberg

Model could help determine quarantine measures needed to reduce Covid-19's spread

As Covid-19 infections soar across the U.S., some states are tightening restrictions and reinstituting quarantine measures to slow the virus' spread. A model developed by MIT researchers shows a direct link between the number of people who become infected and how effectively a state maintains its quarantine measures.

The researchers described their model in a paper published in Cell Patterns in November, showing that the system could recapitulate the effects that quarantine measures had on viral spread in countries around the world. In their next study, recently posted to the preprint server medRxiv, they drilled into data from the United States last spring and summer. That earlier surge in infections, they found, was strongly related to a drop in "quarantine strength" -- a measure the team defines as the ability to keep infected individuals from infecting others.

The latest study focuses on last spring and early summer, when the southern and west-central United States saw a precipitous rise in infections as states in those regions reopened and relaxed quarantine measures. The researchers used their model to calculate the quarantine strength in these states, many of which were early to reopen following initial lockdowns in the spring.

If these states had not reopened so early, or had reopened but strictly enforced measures such as mask-wearing and social distancing, the model calculates that more than 40 percent of infections could have been avoided in all states that the researchers considered. In particular, the study estimates, if Texas and Florida had maintained stricter quarantine measures, more than 100,000 infections could have been avoided in each of those states.

"If you look at these numbers, simple actions on an individual level can lead to huge reductions in the number of infections and can massively influence the global statistics of this pandemic," says lead author Raj Dandekar, a graduate student in MIT's Department of Civil and Environmental Engineering.

As the country battles a winter wave of new infections, and states are once again tightening restrictions, the team hopes the model can help policymakers determine the level of quarantine measures to put in place.

"What I think we have learned quantitatively is, jumping around from hyper-quarantine to no quarantine and back to hyper-quarantine definitely doesn't work," says co-author Christopher Rackauckas, an applied mathematics instructor at MIT. "Instead, good consistent application of policy would have been a much more effective tool."

The new paper's MIT co-authors also include undergraduate Emma Wang and professor of mechanical engineering George Barbastathis.

Strength learning

The team's model is a modification of a standard SIR model, an epidemiological model that is used to predict the way a disease spreads, based on the number of people who are either "susceptible," "infectious," or "recovered." Dandekar and his colleagues enhanced an SIR model with a neural network that they trained to process real Covid-19 data.

The machine-learning-enhanced model learns to identify patterns in data of infected and recovered cases, and from these data, it calculates the number of infected individuals who are not transmitting the virus to others (presumably because the infected individuals are following some sort of quarantining measures). This value is what the researchers label as "quarantine strength," which reflects how effective a region is in quarantining an infected individual. The model can process data over time to see how a region's quarantine strength evolves.

The researchers developed the model in early February and have since applied it to Covid-19 data from more than 70 countries, finding that it has accurately simulated the on-the-ground quarantine situation in European, South American, and Asian countries that were initially hard-hit by the virus.

"When we look at these countries to see when quarantines were instituted, and we compare that with results for the trained quarantine strength signal, we see a very strong correlation," Rackauckas says. "The quarantine strength in our model changes a day or two after policies are instituted, among all countries. Those results validated the model."

The team published these country-level results last month in Cell Patterns, and are also hosting the results at covid19ml.org, where users can click on a map of the world to see how a given country's quarantine strength has changed over time.

What if states had delayed?

Once the researchers validated the model at the country level, they applied it to individual states in the U.S., to see not only how a state's quarantine measures evolved over time, but how the number of infections would have changed if a state modified its quarantine strength, for instance by delaying reopening.

They focused on the south and west-central U.S., where many states were early to reopen and subsequently experienced rapid surges in infections. The team used the model to calculate the quarantine strength for Arizona, Florida, Louisiana, Nevada, Oklahoma, South Carolina, Tennessee, Texas, and Utah, all of which opened before May 15. They also modeled New York, New Jersey, and Illinois -- states that delayed reopening to late May and early June.

They fed the model the number of infected and recovered individuals that was reported for each state, starting from when the 500th infection was reported in each state, up until mid-July. They also noted the day on which each state's stay-at-home order was lifted, effectively signaling the state's reopening.

For every state, the quarantine strength declined soon after reopening; the steepness of this decline, and the subsequent rise in infections, was strongly related to a state's reopening. States that reopened early on, such as South Carolina and Tennessee, had a steeper drop in quarantine strength and a higher rate of daily cases.

"Instead of just saying that reopening early is bad, we are actually quantifying here how bad it was," Dandekar says.

Meanwhile, states like New York and New Jersey, which delayed reopening or enforced quarantine measures such as mask-wearing even after reopening, kept a more or less steady quarantine strength, with no significant rise in infections.

"Now that we can give a measure of quarantine strength that matches reality, we can say, 'What if we kept everything constant? How much difference would the southern states have had in their outlook?'" Rackauckas says.

Next, the team reversed its model to estimate the number of infections that would have occurred if a given state maintained a steady quarantine strength even after reopening. In this scenario, more than 40 percent of infections could have been avoided in each state they modeled. In Texas and Florida, that percentage amounts to about 100,000 preventable cases for each state.

Conceivably, as the pandemic continues to ebb and surge, policymakers could use the model to calculate the quarantine strength needed to keep a state's current infections below a certain number. They could then look through the data to a point in time where the state exhibited this same value, and refer to the type of restrictions that were in place at that time, as a guide to the policies they could put in place at the present time.

"What is the rate of growth of the disease that we're comfortable with, and what would be the quarantine policies that would get us there?" Rackauckas says. "Is it everyone holing up in their houses, or is it everyone allowed to go to restaurants, but once a week? That's what the model can kind of tell us. It can give us more of a refined quantitative view of that question."

Credit: 
Massachusetts Institute of Technology

Massive underground instrument finds final secret of our sun's fusion

A hyper-sensitive instrument, deep underground in Italy, has finally succeeded at the nearly impossible task of detecting CNO neutrinos (tiny particles pointing to the presence of carbon, nitrogen and oxygen) from our sun's core. These little-known particles reveal the last missing detail of the fusion cycle powering our sun and other stars.

In results published Nov. 26 in the journal Nature (and featured on the cover), investigators of the Borexino collaboration report the first detections of this rare type of neutrinos, called "ghost particles" because they pass through most matter without leaving a trace.

The neutrinos were detected by the Borexino detector, an enormous underground experiment in central Italy. The multinational project is supported in the United States by the National Science Foundation under a shared grant overseen by Frank Calaprice, professor of physics emeritus at Princeton; Andrea Pocar, a 2003 graduate alumna of Princeton and professor of physics at the University of Massachusetts-Amherst; and Bruce Vogelaar, professor of physics at the Virginia Polytechnical Institute and State University (Virginia Tech).

The "ghost particle" detection confirms predictions from the 1930s that some of our sun's energy is generated by a chain of reactions involving carbon, nitrogen and oxygen (CNO). This reaction produces less than 1% of the sun's energy, but it is thought to be the primary energy source in larger stars. This process releases two neutrinos -- the lightest known elementary particles of matter -- as well as other subatomic particles and energy. The more abundant process for hydrogen-to-helium fusion also releases neutrinos, but their spectral signatures are different, allowing scientists to distinguish between them.

"Confirmation of CNO burning in our sun, where it operates at only a 1% level, reinforces our confidence that we understand how stars work," said Calaprice, one of the originators of and principal investigators for Borexino.

CNO neutrinos: Windows into the sun

For much of their life, stars get energy by fusing hydrogen into helium. In stars like our sun, this predominantly happens through proton-proton chains. However, in heavier and hotter stars, carbon and nitrogen catalyze hydrogen burning and release CNO neutrinos. Finding any neutrinos helps us peer into the workings deep inside the sun's interior; when the Borexino detector discovered proton-proton neutrinos, the news lit up the scientific world.

But CNO neutrinos not only confirm that the CNO process is at work within the sun, they can also help resolve an important open question in stellar physics: how much of the sun's interior is made up of "metals," which astrophysicists define as any elements heavier than hydrogen or helium, and whether the "metallicity" of the core matches that of the sun's surface or outer layers.

Unfortunately, neutrinos are exceedingly difficult to measure. More than 400 billion of them hit every square inch of the Earth's surface every second, yet virtually all of these "ghost particles" pass through the entire planet without interacting with anything, forcing scientists to utilize very large and very carefully protected instruments to detect them.

The Borexino detector lies half a mile beneath the Apennine Mountains in central Italy, at the Laboratori Nazionali del Gran Sasso (LNGS) of Italy's National Institute for Nuclear Physics, where a giant nylon balloon -- some 30 feet across -- filled with 300 tons of ultra-pure liquid hydrocarbons is held in a multi-layer spherical chamber that is immersed in water. A tiny fraction of the neutrinos that pass through the planet will bounce off electrons in these hydrocarbons, producing flashes of light that can be detected by photon sensors lining the water tank. The great depth, size and purity makes Borexino a truly unique detector for this type of science.

The Borexino project was initiated in the early 1990s by a group of physicists led by Calaprice, Gianpaolo Bellini at the University of Milan, and the late Raju Raghavan (then at Bell Labs). Over the past 30 years, researchers around the world have contributed to finding the proton-proton chain of neutrinos and, about five years ago, the team started the hunt for the CNO neutrinos.

Suppressing the background

"The past 30 years have been about suppressing the radioactive background," Calaprice said.

Most of the neutrinos detected by Borexino are proton-proton neutrinos, but a few are recognizably CNO neutrinos. Unfortunately, CNO neutrinos resemble particles produced by the radioactive decay of polonium-210, an isotope leaking from the gigantic nylon balloon. Separating the sun's neutrinos from the polonium contamination required a painstaking effort, led by Princeton scientists, that began in 2014. Since the radiation couldn't be prevented from leaking out of the balloon, the scientists found another solution: ignore signals from the contaminated outer edge of the sphere and protect the deep interior of the balloon. That required them to dramatically slow the rate of fluid movement within the balloon. Most fluid flow is driven by heat differences, so the U.S. team worked to achieve a very stable temperature profile for the tank and hydrocarbons, to make the fluid as still as possible. The temperature was precisely mapped by an array of temperature probes installed by the Virginia Tech group, led by Vogelaar.

"If this motion could be reduced enough, we could then observe the expected five or so low-energy recoils per day that are due to CNO neutrinos," Calaprice said. "For reference, a cubic foot of 'fresh air' -- which is a thousand times less dense than the hydrocarbon fluid -- experiences about 100,000 radioactive decays per day, mostly from radon gas."

To ensure stillness within the fluid, Princeton and Virginia Tech scientists and engineers developed hardware to insulate the detector -- essentially a giant blanket to wrap around it -- in 2014 and 2015, then they added three heating circuits that maintain a perfectly stable temperature. Those succeeded in controlling the temperature of the detector, but seasonal temperature changes in Hall C, where Borexino is located, still caused tiny fluid currents to persist, obscuring the CNO signal.

So two Princeton engineers, Antonio Di Ludovico and Lidio Pietrofaccia, worked with LNGS staff engineer Graziano Panella to create a special air handling system that maintains a stable air temperature in Hall C. The Active Temperature Control System (ATCS), developed at the end of 2019, finally produced enough thermal stability outside and inside the balloon to quiet the currents inside the detector, finally keeping the contaminating isotopes from being carried from the balloon walls into the detector's core.

The effort paid off.

"The elimination of this radioactive background created a low background region of Borexino that made the measurement of CNO neutrinos possible," Calaprice said.

"The data is getting better and better"

Before the CNO neutrino discovery, the lab had planned to end Borexino operations at the close of 2020. Now, it appears that data gathering could extend into 2021.

The volume of still hydrocarbons at the heart of the Borexino detector has continued to grow in size since February 2020, when the data for the Nature paper was collected. That means that, beyond revealing the CNO neutrinos that are the subject of this week's Nature article, there is now a potential to help resolve the "metallicity" problem as well -- the question of whether the core, outer layers and surface of the sun all have the same concentration of elements heavier than helium or hydrogen.

"We have continued collecting data, as the central purity has continued to improve, making a new result focused on the metallicity a real possibility," Calaprice said. "Not only are we still collecting data, but the data is getting better and better."

Credit: 
Princeton University

Biomarkers could help predict severe SARS-CoV-2 infection

Heidelberg/Germany, 14 December 2020 - Molecular markers in the blood shown to be predictive of severe COVID-19 outcomes resulting from SARS-CoV-2 coronavirus infection have been identified in a study by a Chinese research team. The study results extend understanding of the pathophysiology and clinical progress of COVID-19 with potential for identifying early during the course of infection which individuals are most at risk of developing severe conditions and requiring hospital care.

In addition to pneumonia and septic syndrome, a smaller proportion of patients have also developed severe gastrointestinal and/or cardiovascular symptoms as well as neurological manifestations after SARS-COV-2 infection. This is possible because the angiotensin-converting enzyme 2 (ACE 2) receptor used by SARS-COV-2 for cell entry is found in other organs beside the lungs, including the heart, liver, kidney, pancreas, small intestines and also the CNS (Central Nervous System), especially the glial non-neuronal cells of the brain.

The study took a multi-omics approach integrating data from different -omics disciplines including cutting edge transcriptomic, proteomic and metabolomic technologies to identify significant correlated molecular alterations in patients with COVID-19, especially severe cases. The work evaluated data from 83 individuals in three groups, 16 severe cases, 50 mild and 17 healthy controls without the virus.

Serial blood and throat swab samples were collected from all participants, and to determine whether COVID-19 pathophysiology was associated with particular molecular changes, a total of 23,373 expressed genes, 9,439 proteins, 327 metabolites and 769 extra-cellular RNAs (exRNAs) circulating in the blood were examined. The profiles were significantly different between all three groups.

There were significant differences between mild and severe cases in various immune markers such as type 1 interferon and inflammatory cytokines, which were elevated in the latter, while the former showed robust T cell responses that presumably helped arrest disease progression.

A remarkable and unexpected finding was the existence of significant correlations between the multi-omics data and classical diagnostic blood or biochemical parameters. This was reflected particularly in the proteomic analysis where there was a significant downregulation in the tricarboxylic acid or "Krebs" cycle (TCA) and glycolytic pathways used to release stored energy in both mild and severe patients compared to healthy controls. Conversely, well known host defense pathways, such as the T cell receptor signaling pathway, were elevated in patients with COVID-19.

Another potentially valuable finding for future clinical application was existence of an association between viral load and disease prognosis in severe COVID-19 patients. Unfortunately, six of the patients with severe symptoms died and they had earlier on admission to hospital registered SARS-CoV-2 RNA loads in the throat significantly higher than those who survived. A notable finding here was that proteins participating in antiviral processes, including the T cell and B cell receptor signaling pathways, were positively associated with viral load changes in severe patients who survived.

Finally, specific molecules as biomarkers of subsequent COVID-19 outcomes were identified and used to create prognostic classification models. Predictive models based on four types of data worked well, especially those exploiting the clinical covariates and proteomic data, suggesting a possible framework for identifying patients likely to develop severe symptoms in advance so that treatments can be targeted accordingly.

Credit: 
EMBO

First 10 days after leaving hospital carry high risk for COVID-19 patients, study finds

In the first months after their COVID-19 hospital stay, patients face a high risk of ongoing health problems, trips back to the hospital, and death, a growing number of studies has shown.

But the first week and a half may be especially dangerous, according to a new study in JAMA by a team from the University of Michigan and VA Ann Arbor Healthcare System.

COVID-19 patients had a 40% to 60% higher risk of ending up back in the hospital or dying in the first 10 days, compared with similar patients treated at the same hospitals during the same months for heart failure or pneumonia.

By the end of 60 days, the COVID-19 patients' overall risk of readmission or death was lower than that for the other two serious conditions.

Even so, in the first two months, 9% of the COVID-19 patients who survived hospitalization had died, and almost 20% had suffered a setback that sent them back to the hospital.

That's on top of the 18.5% who had died during their hospitalization.

The researchers compared post-hospital outcomes for nearly 2,200 veterans who survived their hospitalization at 132 VA hospitals for COVID-19 this spring and early summer, with outcomes for nearly 1,800 similar patients who survived a stay for pneumonia that wasn't related to COVID-19, and 3,500 who survived a heart failure-related stay, during the same time.

Special vigilance needed

With hundreds of thousands of Americans now hospitalized for severe cases of COVID-19, and hospitals working to free up beds for an ongoing surge, the study suggests a need for special vigilance in the first days after discharge, says John P. Donnelly, Ph.D., M.S.P.H., M.S., the study's first author and an epidemiologist in the Department of Learning Health Sciences at Michigan Medicine, U-M's academic medical center.

"By comparing COVID-19 patients' long-term outcomes with those of other seriously ill patients, we see a pattern of even greater-than-usual risk right in the first one to two weeks, which can be a risky period for anyone," says Donnelly, who is a scholar in a special training program for critical illness data researchers at the U-M Institute for Healthcare Policy and Innovation.

"Now, the question is what to do about it," he says. "How can we design better discharge plans for these patients? How can we tailor our communication and post-hospital care to their needs? And how can we help their caregivers prepare and cope?"

Building evidence

Donnelly worked on the study with Michigan Medicine and VAAHS critical care physicians Hallie Prescott, M.D., M.Sc., and Theodore Iwashyna, M.D., Ph.D.

Prescott is senior author of another recent paper showing slow recovery in COVID-19 patients hospitalized in Michigan hospitals during the state's spring surge.

"Unfortunately," says Iwashyna, "this is yet more evidence that COVID-19 is not 'one and done.' For many patients, COVID-19 seems to set off cascades of problems that are every bit as serious as those we see in other diseases. But too little of our healthcare response -- and too little research -- is designed to help these patients as they continue for days, weeks, even months to recover from COVID-19."

Iwashyna further notes, "It is likely that there are very similar patterns happening the private sector, but the VA had the data to be able to look early."

More about the study

The study didn't include non-veterans treated at VA hospitals in early-surge states, through the "Fourth Mission" program that offset bed shortages at non-VA hospitals. It also doesn't include any readmissions to non-VA hospitals.

All but 5% of the patients were male, and half were Black, which is not nationally representative but focuses on two high-risk groups. But within the veterans studied, the only factor that made a significant difference in outcomes was age; about half of veterans in their 70s and 80s died in the 60 days after leaving the hospital.

In all, the 2,179 COVID-19 patients spent a total of 27,496 days in the hospital, and the 354 veterans who were readmitted spent a total of 3,728 additional days in the hospital.

The most common reasons listed for rehospitalization were COVID-19, cited in 30% of patients, and sepsis seen in 8.5%. More than 22% of the readmitted veterans went to an intensive care unit.

The study included patients with all three conditions whose hospital stays began in the period from March 1 to June 1, and left the hospital before July 1.

Because these were the early months of the pandemic, Donnelly acknowledges that the experience gained by hospitals during that time, and shared with hospitals in other states with later surges, may have changed post-hospital outcomes.

But the current surge, which is causing hospitals to pull non-specialists into COVID-19 care, and care for other seriously ill patients, may affect outcomes in a negative way.

He and his colleagues hope to continue to study new data from VA and non-VA hospitals as it becomes available, and to compare COVID-19 post-hospital outcomes with those for other serious conditions. Comparisons with patients hospitalized for influenza and other viral illnesses would be important to study, given the widespread false claims that COVID-19 is just a minor illness.

Credit: 
Michigan Medicine - University of Michigan

The un-appeal of banana: liquid e-cigarette flavorings measurably injure lungs

Known for their appetizing flavors, such as bubblegum, banana and strawberry, e-cigarettes continue to grow in popularity around the world. Promoted by makers as a "healthy" alternative to regular tobacco cigarettes, researchers are finding e-cigarettes, or vaping, still result in injury to the lungs.

In a recent study published in the American Journal of Physiology, teams at University of California San Diego School of Medicine, the Royal Adelaide Hospital and the University of Adelaide School of Medicine in Australia found that the flavoring chemicals of e-cigarette vapor alone can measurably damage the lungs, regardless of the presence of nicotine.

"Ninety-nine percent of e-cigarette liquids are flavored. To create these flavor profiles, companies are adding multiple chemicals to achieve that 'perfect' taste," said Laura Crotty Alexander, MD, associate professor of medicine in the Division of Pulmonary, Critical Care and Sleep Medicine at UC San Diego School of Medicine and section chief of Pulmonary Critical Care at Veterans Affairs San Diego Healthcare System. "These chemicals have been found to be toxic to the lungs. When inhaled, they wreak havoc on the lungs and affect specialized protein levels that help keep the body's immune system on track."

Working with 21 different adults who regularly vaped, the team at UC San Diego found changes in certain inflammatory proteins known to cause disease. In each individual who used e-cigarettes, they discovered irregular protein levels within their saliva and airways compared to individuals who did not vape.

Scientists at University of Adelaide then used in vitro methodologies to observe how human airway cells reacted to vapor applied directly to them from 10 flavored liquids used in e-cigarettes. After exposure, they reported that all of the e-liquids damaged cells, with some flavors being more toxic than others.

Combined, the researchers said the data suggests people who use flavored e-cigarettes are damaging their lungs every time they vape. Among the most toxic: chemical profiles for some chocolate and banana flavors.

"Our study demonstrated to us that the name on the bottle is not what is important, it is what goes into the e-liquids and e-cigarettes that matters," said first author Miranda Ween, PhD, senior postdoctoral researcher in the Lung Research Laboratory at the University of Adelaide and Royal Adelaide Hospital, Australia. "Lung cell toxicity and bacterial clearance by the lung's alveolar macrophages was affected by almost every flavor. Chocolate in particular had an unexpectedly high impact, killing almost all the cells and blocking the ability of macrophages to clear away bacteria almost entirely."

Alveolar macrophages initiate inflammatory responses when harmful organisms are detected in the body. Like street sweepers for the lungs, they are powerful immune cells that continuously devour inhaled bacteria and foreign matter entering the lungs.

"Alveolar macrophages are one of the most important immune cells in our lungs; they are designed to maintain the body's homeostasis," said Crotty Alexander. "These macrophages are the first cells to be exposed when a person inhales vapor. When the vapor is toxic, such as in e-cigarettes, these cells trigger an inflammatory response that disrupts the body's homeostasis, resulting in disease and lung damage."

"Our research shows that allowed flavors for e-cigarettes need to be better defined," said Ween. "This could easily be achieved by limiting e-liquids to a single flavoring chemical which has been tested and safety concentrations determined, research that is unfortunately lacking for something that is so popular worldwide."

Credit: 
University of California - San Diego

What happens when rain falls on desert soils? An updated model provides answers

image: Desert Research Institute (DRI) scientist Yuan Luo standes near a weighing lysimeter at DRI's SEPHAS Lysimeter facility in Boulder City, Nev. November 2020.

Image: 
Ali Swallow/DRI

Las Vegas, Nev. (December 14, 2020) - Several years ago, while studying the environmental impacts of large-scale solar farms in the Nevada desert, Desert Research Institute (DRI) scientists Yuan Luo, Ph.D. and Markus Berli, Ph.D. became interested in one particular question: how does the presence of thousands of solar panels impact desert hydrology?

This question led to more questions. "How do solar panels change the way water hits the ground when it rains?" they asked. "Where does the water go? How much of the rain water stays in the soil? How deep does it go into the soil?"

"To understand how solar panels impact desert hydrology, we basically needed a better understanding of how desert soils function hydraulically," explained Luo, postdoctoral researcher with DRI's Division of Hydrologic Sciences and lead author of a new study in Vadose Zone Journal.

In the study, Luo, Berli, and colleagues Teamrat Ghezzehei, Ph.D. of the University of California, Merced, and Zhongbo Yu, Ph.D. of the University of Hohai, China, make important improvements to our understanding of how water moves through and gets stored in dry soils by refining an existing computer model.

The model, called HYDRUS-1D, simulates how water redistributes in a sandy desert soil based on precipitation and evaporation data. A first version of the model was developed by a previous DRI graduate student named Jelle Dijkema, but was not working well under conditions where soil moisture levels near the soil surface were very low.

To refine and expand the usefulness of Dijkema's model, Luo analyzed data from DRI's SEPHAS Lysimeter facility, located in Boulder City, Nev. Here, large, underground, soil-filled steel tanks have been installed over truck scales to allow researchers to study natural water gains and losses in a soil column under controlled conditions.

Using data from the lysimeters, Luo explored the use of several hydraulic equations to refine Dijkema's model. The end result, which is described in the new paper, was an improved understanding and model of how moisture moves through and is stored in the upper layers of dry desert soils.

"The first version of the model had some shortcomings," Luo explained. "It wasn't working well for very dry soils with volumetric water content lower than 10 percent. The SEPHAS lysimeters provided us with really good data to help understand the phenomenon of how water moves through dry soils as a result of rainfall and evaporation."

In desert environments, understanding the movement of water through soils is helpful for a variety of practical uses, including soil restoration, erosion and dust management, and flood risk mitigation. For example, this model will be useful for desert restoration projects, where project managers need to know how much water will be available in the soil for plants after a desert rainstorm, Berli said. It is also a key piece of the puzzle needed to help answer their original question about how solar farms impact desert hydrology.

"The model is very technical, but all of this technical stuff is just a mathematical way to describe how rainwater moves in the soil once the water hits the soil," Berli said. "In the bigger picture, this study was motivated by the very practical question of what happens to rainwater when falling on solar farms with thousands and thousands of solar panels in the desert - but to answer questions like that, sometimes you have to dig deep and answer more fundamental questions first."

Credit: 
Desert Research Institute

Irrelevant information interferes with making decisions, new research reveals

TROY, N.Y. -- Especially during the holidays, online shopping can be overwhelming. Have you ever found yourself spending hours comparing nearly identical products, delving into details that don't actually matter to you? Have you ever finally reached a decision only to find that the product you want is out of stock? Unfortunately, if so, there is a good chance you did not end up making the best choice.

According to new research from behavioral economist Ian Chadd, an assistant professor at Rensselaer Polytechnic Institute, irrelevant information or unavailable options often cause people to make bad choices. When both elements are present, the probability of a poor decision is even greater.

Published in Experimental Economics, Chadd's research examined the behavioral economic concept of free disposal, where resources can be ignored without having a cost. The standard belief has been that, if irrelevant information is included when presenting a product or idea, a consumer can easily skip over the data without taking time or using cognitive power.

Through an experiment involving 222 individual tests each consisting of more than 40 questions, Chadd's research revealed that, in fact, the way information is presented does matter. Decisions made in an environment of irrelevant information carry time, cognitive, and consequence costs.

"These findings tell us a lot about choice architecture, the design process that goes into the creation of environments where people make decisions," Chadd said. "In environments where you have lots of information available, it's exceptionally important that consumers have the ability to filter out information that they find to be irrelevant."

The research also showed that consumers hold a deep "preference for simplicity" in that they are willing to pay a price to reduce the amount of irrelevant and unavailable information.

"This is important insight for policy makers and choice architects alike," Chadd said. "The goal should always be to opt towards simpler and more flexible presentation of information, so that consumers can decide for themselves what is and is not irrelevant and then not just ignore it if they see it, but also give them the option not to see it."

Credit: 
Rensselaer Polytechnic Institute