Culture

Pregnant women with COVID-19 pass no virus but fewer-than-expected antibodies to newborns

BOSTON -- Pregnant women may be especially vulnerable to developing more severe cases of COVID-19 following SARS-CoV-2 infection, but little is known about their anti-SARS-CoV-2 immune response or how it may affect their offspring. In a study published in JAMA Network Open, a group led by investigators at Massachusetts General Hospital (MGH) provides new insights that could help improve care for these women and their newborns and emphasizes the need for pregnant women to be considered in vaccine rollout plans.

The study included 127 pregnant women in their third trimester who received care at three Boston hospitals between April 2 and June 13, 2020. Among the 64 women who tested positive for SARS-CoV-2, investigators detected no virus in maternal or cord blood (despite detection in the women's respiratory system), no signs of the virus in placentas and no evidence of viral transmission to newborns. The researchers suspect that transmission to the fetus may be blocked not only due to the lack of virus in the mothers' blood, but also because the major molecules used by SARS-CoV-2 to enter cells (ACE2 receptor and TMPRSS2 enzyme) are often not physically located together in the placenta.

Most of the women who tested positive developed antibody responses against SARS-CoV-2 proteins, but mother-to-newborn transfer of anti-SARS-CoV-2 antibodies through the placenta was significantly lower than transfer of anti-influenza antibodies.

"Our finding of compromised mother-to-baby transfer of SARS-CoV-2-specific antibodies in third trimester infections has implications for maternal vaccine administration. Specifically, it highlights that pregnant women are a key population to consider in vaccine rollouts. It also raises questions regarding the optimal timing of vaccine administration to best support maternal and newborn immunity," says lead author Andrea Edlow, MD, a maternal-fetal medicine specialist at MGH and an assistant professor of Obstetrics, Gynecology and Reproductive Biology at Harvard Medical School.

Edlow notes that transplacental transfer of antibodies to the fetus is typically highest in the third trimester, so it was unexpected to see significantly reduced transfer of SARS-CoV-2 antibodies relative to those against influenza. "Understanding the mechanisms underlying this inefficient transfer of SARS-CoV-2-specific antibodies after third trimester infection, as well as understanding whether vaccine-generated antibodies have the same or different properties than those from actual infection with the virus, will be critical directions for future research," she says.

Credit: 
Massachusetts General Hospital

Controlling cardiac waves with light to better understand abnormally rapid heart rhythms

image: In Chaos, researchers use mice to study tachycardias and find there are intrinsic mechanisms that exist in heart tissue that they hypothesize lead to the self-termination of rapid cardiac rhythm.

Controllable reentry in a light-sensitive heart: (top left) Activation map during fixed delay pacing; (top right) Alternans (beat-to-beat changes) in voltage; (bottom) The same plot over a longer period shows self-terminating bursts.

Image: 
Gil Bub

WASHINGTON, December 22, 2020 -- Over 300,000 people die each year in the U.S. due to sudden cardiac death. In many cases, sudden cardiac death is caused by abnormally rapid heart rhythms called tachycardias, which means the heart cannot pump adequate blood to the body.

In Chaos, by AIP Publishing, researchers use mice to study tachycardias and find there are intrinsic mechanisms that exist in heart tissue that they hypothesize lead to the self-termination of rapid cardiac rhythm.

"A tachycardia is a heartbeat continuously activating the heart, like a toy train endlessly going around a circular track," said co-author Leon Glass.

The researchers modeled tachycardias in a mouse heart by detecting the wave in one part of the heart and stimulating another part at a fixed time later. They discovered that small changes in the delay lead to either endless circulation or self-termination of the cardiac waves.

During the circulation of the wave and before the termination, there was often an alternation of wave characteristics, such as one cycle proceeding faster and the next being slower. The researchers used optogenetics, a set of tools that allows them to stimulate and control cardiac waves with light, rather than by standard methods of electrical stimulation.

Alternating dynamics, called alternans, in the heart have been associated in the past with initiation of tachycardias. Consequently, efforts have been made to eliminate or reduce alternans.

"Paradoxically, we find that alternans can also facilitate self-termination of tachycardia and might be beneficial," said co-author Gil Bub.

The optical, real-time feedback control system can be used for a wide variety of innovative experiments beyond this specific research.

"We could extend the work to study control of other geometries of abnormal cardiac wave propagation such as spiral waves. It can also be applied to the nervous system where there are abnormal bursting rhythms such as epilepsy," said co-author Leonardo Sacconi.

The team plans to build on this research in several ways, including carrying out similar experiments in cardiac cell culture and investigating how drugs impact the stability of tachycardias, characterizing the molecular and ionic mechanisms facilitating self-termination of the tachycardia, and modifying the magnitude of the alternans to analyze its role in the self-termination of tachycardia.

Credit: 
American Institute of Physics

Keeping up appearances: male fairy-wrens show looks can be deceiving

image: The researchers found that all male superb fairy-wrens produced and maintained vibrant colours, regardless of their 'natural quality'.

Image: 
Alex McQueen

In many animals, female preference for males with the most elaborate appearance is an important factor in the evolution of bright and dramatic colours.

Females are thought to prefer colourful males because only 'high-quality' males - those with the most resources, superior foraging skills or social status - can produce and maintain the most vibrant colours.

By choosing these high-quality males, females may ensure a good father or good genes for their offspring.

But do high quality males that are preferred by females invest more in their appearance?

A new study by Monash University ornithologists suggests, not necessarily.

Led by PhD graduate Dr Alex McQueen, from the Monash University School of Biological Sciences the study published in Behavioural Ecology examined whether conspicuous colours of superb fairy-wrens signal male quality.

"We examined whether only the best quality males with excellent resources can produce the most vibrant colours and whether only the best quality males can maintain their colours in pristine condition," said Alex. "We also tested this in an experiment, by administering testosterone to some males which caused them to produce breeding colours in winter."

"Surprisingly, we found that all male superb fairy-wrens produced and maintained vibrant colours, regardless of their 'natural quality'. Also the males that had to produce breeding colours in challenging winter conditions displayed vibrant colours that were indistinguishable from other males," she said.

Every year male superb fairy-wrens change colour by moulting from a brown non-breeding plumage to an ultraviolet blue and black breeding plumage.

While they are in their breeding plumage, males flaunt their colours to females by performing elaborate sexual displays.

"We predicted that maintaining their colours would be especially important in this species for two reasons: first, males that are preferred by females produce their breeding plumage earlier than all other males, many months before the start of breeding, meaning that those early males display their breeding colours for the longest time each year; and second, ultraviolet blue feathers have been shown to readily fade over time in other birds," said Alex.

The research team measured the colours of the same, wild male fairy-wrens several times a year.

And they recorded how much time males spent preening when they were in their brown non-breeding plumage and colourful breeding plumage.

"We were very surprised to find that male breeding colours do not fade with time," said Alex.

"Despite keeping their colours in pristine condition, males did not spend more time preening while in breeding plumage," she said.

The research team found that instead males 'retouched' their breeding colours by replacing a few blue feathers at a time throughout the breeding season.

"Our study shows that the vibrant breeding colours of male superb fairy-wrens are unlikely to signal male quality to females," said Alex.

"We also found that males are careful to keep their feather colours in excellent condition for sexual displays."

Credit: 
Monash University

Variation in US hospital mortality rates for patients admitted with COVID-19 during the 1st 6 months of pandemic

What The Study Did: Researchers used data from a large national health insurer in the U.S. to examine whether hospital outcomes for patients with COVID-19 are improving.

Authors: David A. Asch, M.D., of the University of Pennsylvania in Philadelphia, is the corresponding author.

To access the embargoed study: Visit our For The Media website at this link https://media.jamanetwork.com/

(doi:10.1001/jamainternmed.2020.8193)

Editor's Note: The article includes conflict of interest disclosures. Please see the article for additional information, including other authors, author contributions and affiliations, conflict of interest and financial disclosures, and funding and support.

Credit: 
JAMA Network

Cannabis use blunts stress reactivity in female rats

Female rats that inhaled vaporized cannabis daily for a month developed a blunted physiological response to stress, according to a new study by Washington State University researchers.

In contrast, male rats that were provided access to the same potency of cannabis over the same 30-day window did not experience any physiological changes in how they responded to a stressful situation.

The results of the study, published in the journal Neurobiology of Stress, indicate there may be significant differences in how chronic cannabis use affects males and females.

The WSU scientists' work also establishes a direct, experimental relationship between chronic cannabis use and dampened stress reactivity.

"We were able to show pretty conclusively that chronic cannabis use can, in fact, significantly dampen stress reactivity in female rats," said Carrie Cuttler, an assistant professor of psychology at WSU and co-author of the study.  "Until now, no one has been able to establish whether this blunted stress response is the cause or the consequence of cannabis use."

One of the main reasons why scientists haven't been able to link smoking cannabis to a muted stress response is that in human studies they can't practically or ethically randomly assign their test subjects to use cannabis or prevent them from consuming the drug for a period of time before beginning an experiment.

Because of these and other issues, researchers interested in examining chronic effects of cannabis use have tended to rely on animal models, where rats are injected with isolated components of cannabis to study the effects of the drug.

"The problem with this approach is that it's stressful to the rats and doesn't recruit the same neurobiological circuits that taking a drug of your own volition does," said Ryan McLaughlin, an assistant professor of integrative physiology and neuroscience at WSU and a co-author on the paper.  "To address this challenge, we developed a more natural cannabis delivery system that enables rats to self-administer vaporized cannabis whenever they feel like it."

For the study, McLaughlin and his team trained rats to poke their noses into a hole with an infrared beam inside whenever they wanted a puff of cannabis vapor. The researchers then measured levels of the stress hormone corticosterone before and after a 30-day period in male and female rats that were either put into a control group that was not given cannabis or one of three experimental test groups that were given access to cannabis of low, medium, or high potencies.

Initially, all of the rats had similar spikes in corticosterone levels when confronted with a stressful situation.

After the 30-day self-administration period, only the female rats that had access to the medium potency cannabis demonstrated a significantly muted physiological response. The rats that were given access to the medium potency cannabis also tended to respond more for the substance and had higher concentrations of the drug in their blood after the experiment which may explain why this group specifically demonstrated the blunted stress response.

"Interestingly, we found that the rats that were given access to higher potency cannabis tended to respond less and had lower concentrations of THC in their blood after the experiment than the rats that had access to the medium potency cannabis," McLaughlin said. "What is causing this difference as well as why females seem to be more receptive to the stress muting effects of cannabis are both things we plan to investigate in the future."

While McLaughlin and Cuttler's work suggests cannabis might have some benefits in conferring resilience to stress, the two researchers emphasized the release of stress hormones typically serves an adaptive purpose, allowing an individual to mobilize energy stores and respond appropriately to threats in the environment.

"An inability to mount a proper hormonal response to stress could have detrimental effects that could potentially be harmful to the individual," Cuttler said. "Research on cannabis is really just now ramping up because of legalization, and our work going forward will play an important role in better understanding both the benefits and potential consequences of chronic cannabis use in women and men."

Credit: 
Washington State University

BioAFMviewer software for simulated atomic force microscopy of biomolecules

image: Schematic illustration of the BioAFMviewer functionality. Computational AFM scanning transforms any biomolecular structure provided in the standard PDB file format into a corresponding simulated AFM graphics.

Image: 
Kanazawa University

Abstract: Atomic force microscopy (AFM) allows to obtain images and movies showing proteins at work, however with limited resolution. The developed BioAFMviewer software opens the opportunity to use the enormous amount of available high-resolution protein data to better understand experiments. Within an interactive interface with rich functionality, the BioAFMviewer computationally emulates tip-scanning of any biomolecular structure to generate simulated AFM graphics and movies. They greatly help in the interpretation of e.g., high-speed AFM observations.

Nowadays nanotechnology allows to observe single proteins at work. Under atomic force microscopy (AFM), e.g., their surface can be rapidly scanned, and functional motions monitored, which is of great importance for applications in all fields of Life science. The analysis and interpretation of experimental results remains however challenging because the resolution of obtained images or molecular movies is far from perfect. On the other side, high-resolution static structures of most proteins are known, and their conformational dynamics can be computed in molecular simulations. This enormous amount of available data offers a great opportunity to better understand the outcome of resolution-limited scanning experiments.

The developed software provides the computational package towards this goal. The BioAFMviewer computationally emulates AFM scanning of any biomolecular structure to generate graphical images that resemble the outcome of AFM experiments (see Fig. 1). This makes the comparison of all available structural data and computational molecular movies to AFM results possible. The BioAFMviewer has a versatile interactive interface with rich functionality. An integrated 3D viewer visualizes the molecular structure while synchronized computational scanning with adjustable tip-shape geometry and spatial resolution generates the corresponding simulated AFM graphics. Obtained results can be conveniently exported as images or movies.

To demonstrate the great potential of simulated AFM scanning in supporting the analysis and interpretation of experimental data, the authors provide several applications to high-speed AFM observations of proteins. As an example, for the gene scissor related CRISPR-associated protein 9 endonuclease (Cas9), simulated scanning allows to disambiguate the domain arrangement seen in the high-speed AFM image and clarify their orientation with respect to the bound nucleotide strand (see Fig. 2). The authors furthermore demonstrate how the BioAFMviewer can transform molecular movies of proteins, obtained for example from molecular modeling, into corresponding simulated AFM movies. Therefore, simulated AFM experiments are possible and can be compared to the movies recorded in high-speed AFM experiments to better understand the resolution-limited observed conformational dynamics.

The BioAFMviewer has a user-friendly interface and no expert knowledge is required to use it. The software is already used by AFM groups worldwide, and it is expected to become a standard platform used by the broad community of Bio-AFM experimentalists. Beyond that, it also provides the interface for researchers from the fields of computational biology and bioinformatics to foster their interdisciplinary collaborations.

The BioAFMviewer software package is currently available for the Windows 10 operating system. A free download is provided on the project website http://www.bioafmviewer.com, where also future updates will become available.

The BioAFMviewer software project was initiated by Holger Flechsig, who is an Assistant Professor of the Nano Life Science Institute at Kanazawa University, Japan, where world-leading AFM experiments of biological matter are performed. The first author, Romain Amyot has developed the software package and continues to work on future applications. Besides that, he also performs high-speed AFM experiments of proteins as a postdoctoral researcher at the Aix-Marseille University, France.

Credit: 
Kanazawa University

Visible hydrogels for rapid hemorrhage control and monitoring

image: Shear-Thinning Hydrogel

Image: 
Khademhosseini Lab

(LOS ANGELES) - There are many different events which may lead to excessive and uncontrolled bleeding within the body. This can occur as a result of inflammation and ulcerations, abnormalities in the blood vessels or trauma-related injuries. Individuals with predisposing conditions, such as cardiac patients, are at particular risk of internal bleeding due to the anticoagulants they are often prescribed as a preventive measure. They are also prone to gastrointestinal bleeds, affecting 40% of patients who are on cardiac assistance devices. In addition to the need for an effective treatment for these conditions, there are also indications for controlling the blood flow that contribute to aneurysms and tumor cell vascularization.

An ideal treatment method would quickly and effectively block the break in the affected blood vessels to stop the bleeding and allow the vessel wall to heal. Then the blocking material would eventually degrade enough to allow the blood to flow again normally.

Current treatments involve both solid and liquid materials as blocking agents. Coils made of braided platinum or stainless steel wires are commonly used. They come in a variety of lengths, shapes and thicknesses and are placed into blood vessels using a special catheter. There are also liquid blocking agents that are injected into the blood vessels and solidify after injection.

But there are many difficulties in using the current methods. Because coils need special catheters for insertion and specialized equipment to detach and place them, the procedure is difficult and requires intensive training by the physician. Also, there are times when multiple coils need to be placed in order to be effective, and there are other times where the coils migrate or compact, necessitating repeat procedures. Liquid agents often leak during injections, resulting in inaccurate placement, toxic effects on the surrounding tissues and the necessity for additional attempts. These problems raise the potential for added time and cost.

In addition, neither of these methods have the ability to accurately view the procedures by conventional CT, MRI, X-ray and fluoroscopic methods. Successful imaging would greatly help to guide placement and to monitor the blood vessel block over time.

A previous study by the authors has used inexpensive, gelatinous materials called hydrogels in an attempt to produce an effective material for controlling hemorrhage. In addition to having superior biocompatibility and tunable elastic and mechanical properties, hydrogels also exhibit sheer-thinning capabilities - the ability to deform upon injection and then quickly self-recover and mold itself to fit the desired space; this allows delivery to be made using standard catheters without specialized equipment. Silicate nanoplatelet discs were mixed into the hydrogel to mimic the clotting ability of platelet cells, and the resultant composite proved to be highly effective at sealing off damaged veins.

A collaborative team of clinical intervention radiology specialist and bioengineering researchers has taken this project a step further by adding imaging particles made from tantalum hydrogel mixture. Tantalum, a highly biocompatible metal, has been shown to be safe to use in biomedical applications and is excreted in the urine.

The team made of scientists from the Terasaki Institute and Mayo Clinic performed various tests to determine the optimum tantalum particle size and quantity to use and their effect on the mechanical properties of the hydrogel composite. They also established the optimum formulation for the three components of their new composite gel. Their experiments determined that the tantalum particles dispersed well into the hydrogel composite, did not affect its mechanical properties and retained their sterility over time.

Another ambitious goal of the project was to perform their hemorrhage control experiments on arteries something that had not been done with hydrogels before. This effort posed additional challenges, due to the higher blood flow and pressure in arteries, their wide size variation and their potential fragility.

After various experiments conducted on the arterial vessels of live anticoagulated porcine models, the team obtained positive results with their new tantalum-laced composite hydrogel. They were able to create an effective seal against bleeding in the pigs' arteries, with a deployment time that was 40 times faster than with coils. The arterial block also exhibited stability and durability, staying in position without migration for four weeks before degrading naturally and being replaced by connective tissue repair of the vessel.

Due to the tantalum component in the gel the animal models' arterial procedures and monitoring were performed with clear, real-time visualization using CT, X-ray fluoroscopy and ultrasound.

"The experimental results that were observed in our tantalum-loaded gel clearly demonstrate its effectiveness and versatility", said HanJun Kim, a member of the Terasaki Institute's team. "We were able to meet our goals of being able to visualize and accurately place a stable block in an arterial vessel to rapidly treat uncontrolled intravascular hemorrhage."

The team went on to conduct additional experiments to test the reversibility of the new hydrogel's arterial placement and found that their solidified arterial plug could easily be removed using an aspirational catheter. They were also able to obtain successful arterial blockage by applying their hydrogel composite to coils that had been placed in the vessels and had failed to achieve or sustain blockage.

The use of this tantalum-loaded gel to control bleeding exhibits many unique advantages over current methods. It is a safe, easy-to-use, and cost effective method which demonstrates optimum effectiveness, precision and versatility for a variety of potential medical applications.

"The treatment method developed here are a vast improvement over current methods and it has the potential to affect many lives," said Ali Khademhosseini, Ph.D., director and CEO for the Terasaki Institute. "It is one of many examples of the innovative and impactful work that we do at our institute."

Credit: 
Terasaki Institute for Biomedical Innovation

Wi-Fi technology with fiber optic-like performance for Industry 4.0

image: A UOC research developed with the ALBA Synchrotron

Image: 
Sergio Ruiz (ALBA synchrotron)

Despite significant advances in wireless technology, the manufacturing industry continues to turn to wired forms of communication such as Ethernet or fibre optics for its most critical tasks. A new study by Cristina Cano and the full professor Xavier Vilajosana, researchers from the Wireless Networks (WiNe) group at the Internet Interdisciplinary Institute (IN3), opens the door to the use of wireless technologies with power and reliability that are comparable to fibre optics and that could replace cabled connections. The research project, published in the journal IEEE Transactions on Wireless Communications, has created the first parameterization of a millimetre-band signal propagation model, a wireless technology capable of transmitting a huge amount of data per second, in an industrial environment. According to the researchers, this new model is the first step towards understanding how this type of signal behaves in an industrial plant and could have a significant impact on the development of Industry 4.0.

Cristina Cano said: "This study is aimed at making communication less expensive and more flexible by incorporating mobile devices into the manufacturing process, something that could be very useful in moving towards Industry 4.0, since it allows, for example, connecting freely movable robotic arms to the production process or establishing communications for data reporting, and controlling or stopping the different components of the process in an emergency. But it could also allow the worker to be a part of the process."

A unique study at the ALBA synchrotron

Before implementing millimetre bands in industrial settings, it is necessary to understand how they propagate in such a distinctive environment. There are currently several propagation models of this type of high-frequency signal, but none in industrial facilities. Cano said: "A model is a representation of reality that, using equations, allows us to predict what will happen to the signal in each environment. There are several models for millimetre bands in office and urban settings, but there are hardly any in industrial settings. These sorts of facilities differ in many ways which could interfere with the behaviour of the wireless signal, such as the height of the ceiling, the material of the walls and floors, or the type of machinery they contain. Our research has allowed us, for the first time, to establish the parameters for an industrial environment."

The researchers were able to measure the behaviour of this type of signal at the ALBA synchrotron, an electron accelerator located in Barcelona that enables researchers from all over the world to carry out experiments using synchrotron light, chosen because its facilities have characteristics that resemble different industrial environments in large production plants, such as refrigeration facilities, server rooms or experimental halls. "It is very difficult for the scientific community to access a manufacturing plant for testing, which is why we believe that this type of model has taken so long to be parameterized. We have been able to advance in this investigation thanks to the ALBA synchrotron, which allowed us access to its facilities. These facilities are very similar to those that we might find in an industrial setting and, also, since we carried out the tests when the accelerator ring was stopped, we were able to access the interior and experiment with the signal in these bands in such a specific environment. We believe that it has been a unique opportunity," explained the researcher.

By measuring in this environment we have been able to verify that typical surfaces in industrial plants, such as reflective pipes, are very beneficial for this type of communication, since they allow the signal to travel along various paths and reception is reinforced, allowing greater coverage. "Specifically, we were able to establish a 110-metre link, the largest communication link achieved with the IEEE 802.11ad standard to date," highlighted the researcher.

Model accessible to the research community

This model is the first step towards understanding how this type of signal behaves in this environment, but protocols must be established to guarantee the reliability required for this sort of communication by the manufacturing industry in its critical processes. The researcher said: "The research in this field can be applied to replace cables in the monitoring processes of production lines where very quick and reliable decisions have to be taken."

She continued: "For this reason, we must be able to guarantee that when an emergency message is sent to stop the production process, it arrives in the required time and its reception is highly reliable. Otherwise, if the message is lost or arrives late, the consequences could be disastrous."

In order to expedite the drafting of these protocols, the new model is accessible to the entire research community. By way of conclusion, Cano said: "The parameters that we provide in the article are useful to predict how the signal will behave in an industrial environment. They can, for example, be configured in a simulator to simulate different configurations and obtain a result that reflects the real situation. In this way, it can help other researchers to design protocols that guarantee the correct functioning of the network."

Credit: 
Universitat Oberta de Catalunya (UOC)

Newly discovered receptor helps to sneak a peek at evolution

Existence of the receptor was now proven experimentally by the team headed by Professor Christopher Grefen from the Chair of Molecular and Cellular Botany at Ruhr-Universität Bochum (RUB). The researchers published their report on the 5. January 2021 in the journal Proceedings of the National Academy of Sciences PNAS.

GET pathway for specific proteins

Together with lipids, membrane proteins are a central component of all biological membranes and fulfil important functions in transport and information transfer within and between cells. The majority of membrane proteins are recognised by a signal recognition particle on the basis of signal sequences at the front end of the protein and are incorporated into the membrane of the endoplasmic reticulum during their synthesis. From there, the proteins are transported to most of the important cellular membranes.

However, there is a functionally important family of membrane proteins whose signal sequence is located at the end of the protein. "Therefore, these proteins can't be integrated into the membrane the usual way," explains lead author Lisa Yasmin Asseck. These so-called tail-anchored (TA) proteins use a mechanism known as GET pathway. GET stands for Guided Entry of TA proteins.

Transport and insertion

The central component of the pathway is a vehicle within the cell fluid, the cytosolic ATPase GET3. It transfers the newly synthesized TA proteins to the receptors GET1 and GET2, which are bound to the endoplasmic reticulum and ensure their membrane insertion.

While the pathway with all its components has been thoroughly described in mammals and their more closely related yeasts, it remained puzzling in plants. "Some components could be identified in plants based on sequence similarities, but there was no trace of the receptor protein GET2," says Christopher Grefen.

An ancient legacy

His team has now successfully identified this previously undiscovered receptor in the model plant Arabidopsis thaliana. By specifically eliminating the receptor - using for example the Crispr/Cas9 genetic scissors - the researchers were also able to study its function more closely. "The only difference between wildtype and Arabidopsis mutants lacking the GET2 receptor is that the latter develop shorter root hairs," explains Grefen. "This does not restrict the growth of the plants under laboratory conditions, it could, however, pose a problem in the wild - especially when water is scarce." Interestingly, mammals without a GET2 receptor are unable to survive, whereas yeast cells can grow, since they have developed a backup mechanism that kicks in when the receptor is missing.

A remarkable observation for the researchers is the fact that the GET2 receptors of different organisms show great structural similarities despite differences in sequence. "This suggests that their function is evolutionarily conserved. That means that the GET pathway has been around for a very long time, and today's organisms have inherited it from their last common ancestor during evolution," elaborates Christopher Grefen. "The discovery of the protein sequence of GET2 from Arabidopsis provides an important piece of the puzzle for understanding the cross-kingdom evolution of the GET pathway and, at the same time, serves as basis for further studies in other plant and algal species."

Credit: 
Ruhr-University Bochum

Nanoparticles could improve oil production

A team of scientists from Siberian Federal University together with their colleagues from Novosibirsk studied the effect of nanoparticles on oil production efficiency. When added to the water that displaces oil from a reservoir, nanoparticles improve the separation of oil drops from mine rock and their washing to the surface. The work received a grant from the Russian Science Foundation, and an article about it was published in the Journal of Molecular Liquids.

The oil and gas industry is one of the main sectors of the Russian economy and its sustainable development equally depends on the discovery of new oil fields and rational utilization of the existing ones. Efficiency could be increased through new methodologies that would improve oil production, and one of the ways to reach this goal is to use nanotechnologies.

Nanomaterials possess many unique properties that make them useful in different areas of the oil and gas industry. They are small in size and have high chemical and thermal stability. Because of these characteristics, low-concentration suspensions of nanoparticles can be pumped into an oil well to improve oil recovery. Nanoparticles increase the wettability of oil-bearing strata, making it easier to separate oil from mine rock.

Another factor that affects the efficiency of oil production is interfacial tension: a force that occurs at an interface between two liquids. Oil in mine rock is subject to the capillary force that keeps it in place. To weaken it, interfacial tension has to be reduced, and this is exactly what nanoparticles do.

A team of researchers from Siberian Federal University and the Kutateladze Institute of Thermophysics of the Siberian Department of the Russian Academy of Sciences studied the effects of the size, concentration, composition, and surface of nanoparticles on the wettability and interfacial tension of crude oil. The goal was to develop a liquid with special recovery-improving additives. Before the experiment, the team prepared nanoliquids based on distilled water and used silicon dioxide (SiO2) and aluminum oxide (Al2O3) powders as nanoparticles. To measure the wettability and interfacial tension, the team used an automatic tensimeter: a device that measures the geometrical parameters and therefore the surface tension of liquid drops. The study showed that even the smallest amounts of nanoparticles added to the liquid dramatically changed rock wettability characteristics which led to increased oil recovery.

"Systemic research on the use of nanosuspensions and nanoemulsions in oil and gas field development technologies is extremely important for the industry. However, our project is also relevant from the point of view of fundamental knowledge it provides. Although the properties of nanosuspensions remain largely understudied, it is clear that they are dramatically different from regular coarse suspensions," said Andrey Minakov, a Candidate of Physics and Mathematics, the head of the RSF project, and an assistant professor at the Department of Thermal Physics, SFU.

Credit: 
Siberian Federal University

Trade in wild animals is thriving online, despite risk of disease transmission

Despite COVID-19 restrictions and the risk of animal to human disease transmission, illegal wildlife trade on social media networks has continued, with wild animals sometimes sold as 'lockdown pets'. Researchers from Oxford Brookes University and the University of Western Australia, having analysed around 20,000 Facebook posts about wild pet trade, are urging increased governance on social media sites in order to curb potential extinctions and reduce the risk of pandemics.

With the current global pandemic of COVID-19, the role of wild animals in emerging infectious diseases (EID) is in the spotlight. Human-animal transmission has been documented in previous virus outbreaks such as SARS and MERS. Several of the early cases of COVID-19 were linked to a wet market in Wuhan, China, although there is, as yet, not enough evidence to conclude how the virus transmitted to humans.

Despite the known risk of animal to human transmission of disease, the researchers found no clear evidence that the online wildlife trade was discouraged or decreased amidst the pandemic. Examining advertisements on Facebook in Brazil and Indonesia, they found thousands of posts advertising wild animals, with a potential audience of over 200,000 people. Indeed, only 0.44% of over 20,000 online wildlife trade advertisements had any COVID-19-related content.

Adverts mentioning COVID-19 can stimulate wildlife trade

Co-author Anna Nekaris, Professor of Primate Conservation at Oxford Brookes University said: "We anticipated that we would see many posts mentioning COVID-19 regarding the potential dangers of wildlife trade or using it as a reason for a temporary cessation of sales. Instead, advertisements mentioning COVID-19 often stimulated wildlife trade, suggesting the pandemic was a great time to buy an exotic pet for companionship, for example."

Strikingly, they found that no traders or consumers discussed the role of wildlife trade in spreading diseases. Instead, discounts were given, home delivery services were provided, and customers encouraged to spend larger amounts of time due to lockdown with the animals.

Co-author Thais Morcatty, a PhD student at Oxford Brookes University, commented:

"Clandestine markets often expand to supply the demand that still exists and in that case, not only does wildlife trade continue, monitoring it becomes nearly impossible."

Co-author Kim Feddema, a PhD student at the University of Western Australia said:

"The links between wildlife trade and infectious disease are very concerning, however, what we find is that purely focusing on the risk of transmission as justification for widespread bans may not be effective on the ground. In order to have meaningful change that protects wild species and humans, it is imperative that we take into account the nuance and complexity of the situations and listen to what the traders themselves are telling us."

Credit: 
Oxford Brookes University

Ancient DNA sheds light on the peopling of the Mariana Islands

image: Excavation work area outside the Ritidian Beach Cave site in northern Guam, Mariana Islands.

Image: 
Hsiao-chun Hung

To reach the Mariana Islands in the Western Pacific, humans crossed more than 2,000 kilometres of open ocean, and around 2,000 years earlier than any other sea travel over an equally long distance. They settled in the Marianas around 3,500 years ago, slightly earlier than the initial settlement of Polynesia.

"We know more about the settlement of Polynesia than we do about the settlement of the Mariana Islands", says first author Irina Pugach, a researcher at the Max Planck Institute for Evolutionary Anthropology in Leipzig, Germany. The researchers wanted to find out where people came from to get to the Marianas and how the ancestors of the present Mariana Islanders, the Chamorro, might be related to Polynesians.

To address these questions the researchers obtained ancient DNA data from two skeletons from the Ritidian Beach Cave site in northern Guam, dating to around 2,200 years ago. "We found that the ancestry of these ancient skeletons is linked to the Philippines", says Pugach. "These findings strengthen the picture that has emerged from linguistic and archaeological studies, pointing to an Island Southeast Asia origin for the first settlers of the Marianas", says co-author Mike T. Carson, an archaeologist at the Micronesian Area Research Center at the University of Guam.

"We also find a close link between the ancient Guam skeletons and early Lapita individuals from Vanuatu and Tonga in the Western Pacific region", adds Pugach. "This suggests that the Marianas and Polynesia may have been colonized from the same source population, and raises the possibility that the Marianas played a role in the eventual settlement of Polynesia."

The researchers point out that while the new results provide interesting new insights, they are based on only two skeletons that date from around 1,400 years after the first human settlement in Guam. "The peopling of Guam and the settlement of such remote archipelagos in Oceania needs further investigation", says senior author Mark Stoneking of the Max Planck Institute for Evolutionary Anthropology.

Credit: 
Max Planck Institute for Evolutionary Anthropology

NTU Singapore scientists invent glue activated by magnetic field

image: (Left to right) NTU Assoc Prof Terry Steele, Prof Raju V. Ramanujan and Dr Richa Chaudhary holding up various soft and hard materials bonded by their new magnetocuring glue

Image: 
NTU Singapore

Scientists from Nanyang Technological University, Singapore (NTU Singapore), have developed a new way to cure adhesives using a magnetic field.

Conventional adhesives like epoxy which are used to bond plastic, ceramics and wood are typically designed to cure using moisture, heat or light. They often require specific curing temperatures, ranging from room temperature up to 80 degrees Celsius.

The curing process is necessary to cross-link and bond the glue with the two secured surfaces as the glue crystallises and hardens to achieve its final strength.

NTU's new "magnetocuring" glue can cure by passing it through a magnetic field. This is very useful in certain environmental conditions where current adhesives do not work well. Also, when the adhesive is sandwiched between insulating material like rubber or wood, traditional activators like heat, light and air cannot easily reach the adhesive.

Products such as composite bike frames, helmets and golf clubs, are currently made with two-part epoxy adhesives, where a resin and a hardener are mixed and the reaction starts immediately.

For manufacturers of carbon fibre - thin ribbons of carbon glued together layer by layer - and makers of sports equipment involving carbon fibre, their factories use large, high temperature ovens to cure the epoxy glue over many hours. This energy-intensive curing process is the main reason for the high cost of carbon fibre.

The new "magnetocuring" adhesive is made by combining a typical commercially available epoxy adhesive with specially tailored magnetic nanoparticles made by the NTU scientists. It does not need to be mixed with any hardener or accelerator, unlike two-component adhesives (which has two liquids that must be mixed before use), making it easy to manufacture and apply.

It bonds the materials when it is activated by passing through a magnetic field, which is easily generated by a small electromagnetic device. This uses less energy than a large conventional oven.

For example, one gram of magnetocuring adhesive can be easily cured by a 200-Watt electromagnetic device in five minutes (consuming 16.6 Watt Hours). This is 120 times less energy needed than a traditional 2000-Watt oven which takes an hour (consuming 2000 Watt Hours) to cure conventional epoxy.

Developed by Professor Raju V. Ramanujan, Associate Professor Terry Steele and Dr Richa Chaudhary from the NTU School of Materials Science and Engineering, the findings were published in the scientific journal Applied Materials Today and offer potential application in a wide range of fields.

This includes high-end sports equipment, automotive products, electronics, energy, aerospace and medical manufacturing processes. Laboratory tests have shown that the new adhesive has a strength up to 7 megapascals, on par with many of the epoxy adhesives on the market.

Assoc Prof Steele, an expert in various types of advanced adhesives, explained: "Our key development is a way to cure adhesives within minutes of exposure to a magnetic field, while preventing overheating of the surfaces to which they are applied. This is important as some surfaces that we want to join are extremely heat-sensitive, such as flexible electronics and biodegradable plastics."

How "magnetocuring" glue works

The new adhesive is made of two main components - a commercially available epoxy that is cured through heat, and oxide nanoparticles made from a chemical combination including manganese, zinc and iron (MnxZn1-xFe2O4).

These nanoparticles are designed to heat up when electromagnetic energy is passed through them, activating the curing process. The maximum temperature and rate of heating can be controlled by these special nanoparticles, eliminating overheating and hotspot formation.

Without the need for large industrial ovens, the activation of the glue has a smaller footprint in space and energy consumption terms. The energy efficiency in the curing process is crucial for green manufacturing, where products are made at lower temperatures, and use less energy for heating and cooling.

For instance, manufacturers of sports shoes often have difficulty heating up the adhesives in between the rubber soles and the upper half of the shoe, as rubber is a heat insulator and resists heat transmission to the conventional epoxy glue. An oven is needed to heat up the shoe over a long time before the heat can reach the glue.

Using magnetic-field activated glue bypasses this difficulty, by directly activating the curing process only in the glue.

The alternating magnetic field can also be embedded at the bottom of conveyor belt systems, so products with pre-applied glue can be cured when they pass through the magnetic field.

Improving manufacturing efficiency

Prof Raju Ramanujan, who is internationally recognised for his advances in magnetic materials, jointly led the project and predicts that the technology could increase the efficiency of manufacturing where adhesive joints are needed.

"Our temperature-controlled magnetic nanoparticles are designed to be mixed with existing one-pot adhesive formulations, so many of the epoxy-based adhesives on the market could be converted into magnetic field-activated glue," Prof Ramanujan said.

"The speed and temperature of curing can be adjusted, so manufacturers of existing products could redesign or improve their existing manufacturing methods. For example, instead of applying glue and curing it part by part in a conventional assembly line, the new process could be to pre-apply glue on all the parts and then cure them as they move along the conveyor chain. Without ovens, it would lead to much less downtime and more efficient production."

First author of the study, Dr Richa Chaudhary said, "The curing of our newly-developed magnetocuring adhesive takes only several minutes instead of hours, and yet is able to secure surfaces with high strength bonds, which is of considerable interest in the sports, medical, automotive and aerospace industries. This efficient process can also bring about cost savings as the space and energy needed for conventional heat curing are reduced significantly."

This three-year project was supported by the Agency for Science, Technology and Research (A?STAR).

Previous work on heat-activated glue used an electric current flowing through a coil, known as induction-curing, where the glue is heated and cured from outside. However, its drawbacks include overheating of the surfaces and uneven bonding due to hotspot formation within the adhesive.

Moving forward, the team hopes to engage adhesive manufacturers to collaborate on commercialising their technology. They have filed a patent through NTUitive, the university's innovation and enterprise company. They have already received interest in their research from sporting goods manufacturers.

Credit: 
Nanyang Technological University

Droughts, viruses and road networks: Trends that will impact our forests

Earth's forests are indispensable for both humans and wildlife: they absorb CO2, provide food for large parts of the world's population and are home to all sorts of animals.

However, forest conservation measures are lagging in many countries, says Laura Vang Rasmussen, an assistant professor at the University of Copenhagen's Department of Geosciences and Nature Management.

"It is critical for all countries - especially those with poor economic conditions, to prioritize forests and have forest conservation plans. Without the adoption of conservation strategies, droughts and viral outbreaks could have severe consequences on forests and humans alike," she says.

Rasmussen, along with fellow researchers from the University of Manchester, is behind a new Nature-study in which 24 experts from the around the world have ranked the most significant trends that will affect the world's forests over the coming decade.

Drought and new viral outbreaks

In Denmark, we have seen an increase in the number of summers with scant rainfall, and in the rest of the world - particularly on the US West Coast - droughts have been responsible for massive and devastating forest fires. The new study argues that this trend will continue:

"When we lose forest, due to drought for example, the risk of spreading viruses like coronavirus increases. When forest fires disturb natural ecosystems, disease carrying animals such as bats or rats flee from their charred ecosystems into towns and villages. And, as we have seen with the coronavirus pandemic, viral outbreaks have enormous consequences on global health and economy," explains Rasmussen.

Humans are migrating from the countryside to cities, with more people on the way

More people wanting to move from rural areas into the cities can have both positive and negative consequences for the world's forests.

"It could be that the amount of forest increases as more and more farmers abandon their livelihoods in favour of higher wage urban jobs. This would allow forests room to grow. Conversely, we run the risk that ballooning urban populations will increase demand for marketable crops, which will result in more forests being cleared for agriculture," says Laura Vang Rasmussen.

Furthermore, the planet's human population is projected to increase to roughly 8.5 billion by 2030. This will result in an increased demand for meat, cereals, vegetables, etc., meaning that more forests will need to be cleared to accommodate for fields and meat production farms and facilities.

25 million kilometres of new road networks worldwide

By 2050, global road networks are projected to expand by roughly 25 million kilometres.

This is likely to have a positive effect on human mobility, allowing people to shuttle between cities with ease and more readily move and sell goods.

However, the downside of road building is the inevitably of having to clear forestland for roadbed.

Besides having to look after forests for the sake of the environment and wildlife, forest conservation also relates to poverty, concludes Laura Vang Rasmussen:

"It is problematic that forest conservation, agriculture and poverty are seen as distinct from one another. Indeed, the three factors influence each other, as strategies to increase agricultural production can negatively impact forests. On the other hand, an increase in forested areas makes it more difficult for agriculture to produce enough food. As such, we hope that our research is able to contribute towards highlighting the complex dynamics between agricultural production, deforestation, poverty and food security."

Credit: 
University of Copenhagen - Faculty of Science

A blazar in the early universe

image: VLBA image of the blazar PSO J0309+27 at a distance of 12.8 billion light-years from Earth. Galaxy's core is at bottom right, and jet is propelled outward from the core toward upper left.

Image: 
Spingola et al.; Bill Saxton, NRAO/AUI/NSF.

The supersharp radio "vision" of the National Science Foundation's Very Long Baseline Array (VLBA) has revealed previously unseen details in a jet of material ejected at three-quarters the speed of light from the core of a galaxy some 12.8 billion light-years from Earth. The galaxy, dubbed PSO J0309+27, is a blazar, with its jet pointed toward Earth, and is the brightest radio-emitting blazar yet seen at such a distance. It also is the second-brightest X-ray emitting blazar at such a distance.

In this image, the brightest radio emission comes from the galaxy's core, at bottom right. The jet is propelled by the gravitational energy of a supermassive black hole at the core, and moves outward, toward the upper left. The jet seen here extends some 1,600 light-years, and shows structure within it.

At this distance, PSO J0309+27 is seen as it was when the universe was less than a billion years old, or just over 7 percent of its current age.

An international team of astronomers led by Cristiana Spingola of the University of Bologna in Italy, observed the galaxy in April and May of 2020. Their analysis of the object's properties provides support for some theoretical models for why blazars are rare in the early universe. The researchers reported their results in the journal Astronomy & Astrophysics.

Credit: 
National Radio Astronomy Observatory