Culture

A revolutionary approach to increasing crop yield in rice

image: When the cell membrane proton pump gene OSA1 is overexpressed, nutrient uptake and carbon dioxide intake are increased, giving the new strain of rice a yield over 30% higher than wild rice.

Image: 
Issey Takahashi

A group of scientists led by Drs Toshinori Kinoshita and Maoxing Zhang (Institute of Transformative Bio-Molecules,Nagoya University, Japan) and Dr Yiyong Zhu (Jiangsu Collaborative Innovation Center for Solid Organic Waste Utilization, Nanjing Agricultural University, China) have developed a method which, by increasing the number of a plasma membrane proton pump gene in rice, simultaneously increases nutrient uptake through the roots and stomatal opening, thus increasing the yield of paddy field grown rice by over 30%.

In their previous research, the group had found that the plasma membrane proton pump played an important role in influencing stomatal opening. When they created a variant of rice with an overexpression of a particular plasma membrane proton pump gene, they found that nutrient uptake through the roots increased by over 20%, and photosynthesis by over 20%. Growth experiments at four separate rice farms with different growth conditions showed an increase in overall rice yield of over 30%. The success of this research is a groundbreaking achievement, with its simultaneous effect upon nutrient uptake and stomatal opening, and is expected to see a variety of practical uses in the future.

As they take in mineral nutrients such as nitrogen, phosphorous and potassium through their roots, plants simultaneously absorb carbon dioxide through the stomata on their leaves, and grow through photosynthesis. Photosynthesis enables not only the farming of plants for food, but the exchange of carbon dioxide and management of the earth's environment. CO2 intake in plants occurs exclusively through the stomata, which are holes on the surface of the leaves. Thus, if it were possible to open the stomata wider, increase the nutrient uptake through the roots, and thus increase the rate of photosynthesis, not only would it be possible to speed up growth and increase yield of plants, but also to reduce CO2 levels and the use of fertilizers.

With that in mind, in this study, they created a variant of the rice plant with an increased expression of the plasma membrane proton pump gene OSA1 and carried out an analysis of its phenotype. They found that the proton pump overexpressed rice, when compared to a wild strain, took up over 20% more mineral nutrients, and opened its stomata over 25% wider when exposed to light (Figure 2). On further analysis, they found that its carbon dioxide storage capacity (the indicator of photosynthesis activity) was increased by over 25%, and that its dry weight (biomass) increased by 18-33% in hydroponic laboratory growth.

With this determined, the researchers set out to find if the results could be replicated under realistic growing conditions. They conducted yield measurement exercises at four separate rice farms over the course of two years, finding that the rice with the overexpressed OSA1 gene had a yield over 30% higher than that of the wild strain. Even more interestingly, they discovered that even if the level of nitrogen fertilizer was reduced by half, it still produced a greater yield than the wild strain did with normal levels of nitrogen.

The success of this revolutionary piece of research points to a future in which food supply and CO2 overproduction issues can be solved through use of these proton pump gene overexpression plants. While these early stage models have been created through genetic modification, it is anticipated that future generations not reliant on GM but instead using genome editing or chemical engineering will be realized.

Credit: 
Institute of Transformative Bio-Molecules (ITbM), Nagoya University

Artificial skin brings robots closer to 'touching' human lives

image: The artificial sensing system TacLINK can collect and process tactile information using a stereo (3D) camera and a finite element model-based analysis.

Image: 
Courtesy: Prof. Van Anh Ho from JAIST

Modern-day robots are often required to interact with humans intelligently and efficiently, which can be enabled by providing them the ability to perceive touch. However, previous attempts at mimicking human skin have involved bulky and complex electronics, wiring, and a risk of damage. In a recent study, researchers from Japan sidestep these difficulties by constructing a 3D vision-guided artificial skin that enables tactile sensing with high performance, opening doors to innumerable applications in medicine, healthcare, and industry.

Robots have come a long way since their original inception for high-speed automation. Today, robots can be found in a wide variety of roles in medicine, rehabilitation, agriculture, and marine navigation. Since a lot of these roles require human contact, robots are expected to become adept at interacting with humans in a safe and intelligent manner.

One way to accomplish this goal is by endowing robots with the ability to perceive touch. Accordingly, attempts have been made to develop artificial "skins" capable of inducing tactile sensations and allowing robots to be more aware of their surrounding environment, in the same way humans are. However, despite great advances in tactile sensor technology, the endeavor remains challenging. "The main challenge lies in mimicking the inherent complexity of natural skin structure that has a particularly high density of mechanoreceptors with specialized functions such as sensing pressure, vibrations, temperature, and pain," says Associate Professor Van Anh Ho from Japan Advanced Institute of Science and Technology, where he leads a laboratory working on soft haptic technology. He adds, "All approaches so far have only focused on developing a skin-like structure with a matrix of different sensors without considering the bulk of wires, electronic components, and the risk of damage from frequent contact."

In a new study published in IEEE Transactions on Robotics, Prof. Ho and his colleague Lac Van Duong, a doctoral student at JAIST, developed a high-performance, vision-based artificial sensing system that is low-cost, has a relative simple structure, and is scalable. Named TacLINK, this system can process tactile information and even determine contact force and contact geometry upon interacting with the surroundings.

The researchers based the structure of TacLINK essentially on a transparent acrylic tube (serving as a rigid bone frame) covered by a continuous soft artificial skin with a sensing area of about 500 cm2. They used silicone rubber to fabricate the artificial skin due to its high elasticity and smoothness. Moreover, the material could be inflated to change its form and stiffness. The researchers printed an array of markers on the surface of this skin to track its deformation instead of embedding sensors or electronic components inside the skin. This greatly reduced its bulkiness, cost, and chances of possible damage.

The vision system consisted of two co-axial cameras arranged to form a stereo camera that tracked the 3D displacement of the markers on the inner wall of the skin. In addition, researchers employed a finite element model (FEM) to estimate the structural stiffness of the skin. By combining the data from both these sources, they were able to reconstruct the contact geometry and contact force distribution simultaneously. Moreover, unlike in previous studies, this method worked for multiple contact points.

With such positive outcomes, Prof. Ho is hopeful about the creation of a future generation of touch-sensing-enabled robotic devices. "The artificial skin used in our study can be easily fabricated by the casting method and can, therefore, be implemented on other parts of robots, such as fingers, legs, chests, and heads, and even for smart prosthetics for humans, allowing a disabled person to perceive sensations the same way as a normal human," comments Prof. Ho excitedly. "In addition, it can also be used to design various sensory devices in medicine, healthcare, and industry. In fact, it is especially suited for the development of robotic systems in the post-COVID era to enable remote service with robotic avatars."

It certainly seems like the robots of the near future will be "touching" human lives more than ever before!

Credit: 
Japan Advanced Institute of Science and Technology

Modern anti-cancer drugs work via tiny molecular motions

Modern immunotherapeutic anti-cancer drugs support a natural mechanism of the immune system to inhibit the growth of cancer cells. They dock onto a specific receptor of the killer cell and prevent it from being switched off by the cancer cells. This is a complex molecular process, which is known but has not yet been fully understood. In a molecular dynamics study conducted by the group led by medical information scientist Wolfgang Schreiner and gynaecologists Heinz Kölbl and Georg Pfeiler from MedUni Vienna, working with biosimulation expert Chris Oostenbrink from the University of Natural Resources and Applied Life Sciences (Boku) Vienna, has now, for the first time, analysed this mechanism for the drugs nivolumab and pembrolizumab. It was found that tiny molecular motions are of key significance. The study has been published in the leading journal Cancers.

The human immune system protects the body against bacteria, viruses and damaged cells, such as cancer cells. Specialised immune cells, such as natural killer cells (NK cells), work together to identify and eliminate these threats. Sometimes these killer cells inadvertently target healthy cells, and this can result in severe autoimmune reactions. If this happens, the immune system deploys a safeguard measure, so-called "programmed cell death" (apoptosis). This is triggered when the endogenous surface molecule PD-L1 binds to the receptor expressed on the killer cell, the PD- molecule. In this process, the (immuno-checkpoint) receptor acts like an emergency off switch. If cells are attacked in error, they produce PD-L1 molecules and reach towards the killer cells, thus killing them. Cancer cells are also able to express PD-L1 and these bind to the checkpoint, thereby causing the killer cells to die and allowing the tumour to grow.

This is exactly where modern immunotherapeutic anti-cancer drugs (checkpoint inhibitors) come in. They resemble the surface molecule PD-L1 and bind to the PD-1 receptor, but the triggered mechanism is different, as the killer cells are not sent into cell death. Although the checkpoints are blocked, they are not activated. Cancer cells are no longer able to bind to the blocked receptors and the killer cells retain their ability to destroy cancer cells. Immunotherapy exploits this phenomenon, even though it was hitherto not fully understood exactly how the binding occurred without a switching process.

Wolfgang Schreiner from the Center for Medical Statistics, Informatics and Intelligent Systems at MedUni Vienna's Institute of Biosimulation and Bioinformatics, gynaecologists Georg Pfeiler and Heinz Kölbl, who is also Director of MedUni Vienna's Department of Obstetrics and Gynecology, and Chris Oostenbrink from Boku Vienna, have now investigated the key differences between the natural PD-L1 and the drugs used for treating various cancers such as breast cancer, lung cancer and melanoma in a molecular dynamics model by means of computer simulation. The motions of individual atoms and their reciprocal influence were calculated and mathematically analysed on the "supercomputer" belonging to Vienna Scientific Cluster (VSC). In this way it was possible to identify the smallest differences in the molecular motions between the natural molecule PD-L1 and those of the drugs.

Schreiner explains: "One can virtually make a precise mathematical assessment of the "facial expressions" of the molecules in slow motion, up close and personal. It was found that some loops of the PD-1 molecule deform in a different way, depending on their binding partner." These small differences would be directed inside the killer cell by the PD-1 molecule and produce the desired effect, namely that, although the drugs would bind to the receptor, they would not activate it like the natural surface molecule PD-L1.

What initially appears to be a slight difference is actually the basis for our continually growing understanding of cellular processes. The more we know about these, the more specific we can be in the development of checkpoint inhibitors. Research findings of this kind are highly promising, particularly in the area of gynaecological oncology, says Pfeiler: "Of course, checkpoint inhibitors can only work if the corresponding surface molecules (PD-1, PDL-1) that are to be inhibited, are actually expressed. This therapy is then a good option for triple negative breast cancer, for example. Interestingly, to date, only the expression of PDL-1 has been observed pre-therapeutically but not the expression of PD-1. This raises manifold research questions in terms of precision medicine."

Credit: 
Medical University of Vienna

Thanks to machine learning, the future of catalyst research is now!

image: 300 quaternary catalysts are randomly sampled from a large material space, where their performance in relation to OCM is systematically evaluated by high-throughput experimentation, followed by machine learning, to identify a bias-free dataset in order to learn the underlying patterns in catalyst performance which are eventually used for further catalyst discoveries.

Image: 
JAIST

To date, research in the field of combinatorial catalysts has relied on serendipitous discoveries of catalyst combinations. Now, scientists from Japan have streamlined a protocol that combines random sampling, high-throughput experimentation, and data science to identify synergistic combinations of catalysts. With this breakthrough, the researchers hope to remove the limits placed on research by relying on chance discoveries and have their new protocol used more often in catalyst informatics.

Catalysts, or their combinations, are compounds that significantly lower the energy required to drive chemical reactions to completion. In the field of "combinatorial catalyst design," the requirement of synergy--where one component of a catalyst complements another--and the elimination of ineffective or detrimental combinations are key considerations. However, so far, combinatorial catalysts have been designed using biased data or trial-and-error, or serendipitous discoveries of combinations that worked. A group of researchers from Japan has now sought to change this trend by trying to devise a repeatable protocol that relied on a screening instrument and software-based analysis.

Their new study, published in ACS Catalysis, details the identification of effective catalyst combinations, using the proposed protocol, for the oxidative coupling of methane (OCM). OCM is a widely used chemical reaction used to convert methane into useful gases in the presence of oxygen and the catalyst. Elaborating on the motivations behind the study, Dr. Toshiaki Taniike, Professor at the School of Materials Science, Japan Advanced Institute of Science and Technology and corresponding author of the study, says, "Combinatorial catalyst design is hardly generalizable, and the empirical aspect of the research has biased the literature data toward accidentally found combinations".

To derive a bias-free dataset from OCM for devising the protocol, the researchers sampled randomly 300 solid catalysts from a vast materials space containing upwards of 36,000 catalysts! Screening such a large number of catalysts is near impossible by human standards. Hence, the team used a high-throughput screening instrument to evaluate their performance at facilitating OCM. The obtained dataset was used to outline the novel protocol, aimed at providing a guideline for catalyst design. This was implemented in the form of a "decision tree classification," which is a form of machine learning that helped in understanding the efficiency of the selected catalyst combinations, in giving better OCM yield. This, in turn, helped in drawing up the required catalyst design guidelines.

Interestingly, the results showed that, even with random sampling, 51 out of the 300 catalysts gave a better OCM yield when compared to the alternative non-catalytic process. Explaining the potential implications of their discovery, Dr. Keisuke Takahashi, Associate Professor at Hokkaido University and co-author of this study, says, "The combination of high throughput experimentation and data science has already demonstrated the power of bias-free catalyst big data in finding novel catalysts as well as a catalyst design guideline. It is also important to state the essentiality of these approaches for implementing such a demanding study in a realistic time frame. By equipping all the essential techniques of the study, truly nonempirical catalyst developments could be realized".

Indeed, we can hope, along with the scientists, that this strategy will "catalyze" several future material science discoveries!

Credit: 
Japan Advanced Institute of Science and Technology

Life changes influence physical activity

image: : Life changes influence the number of steps of women and men in different ways

Image: 
University of Jyväskylä

Life changes influence the amount of physical activity in a person, according to a recent study by the University of Jyväskylä. The birth of children and a change of residence, marital status and place of work all influence the number of steps of men and women in different ways. For women, having children, getting a job and moving from town to the countryside reduce everyday exercise.

A study conducted by the Faculty of Sports & Health Sciences found that the birth of the first child significantly reduces the number of everyday steps in women. As children grow, women's aerobic steps, in turn, increase. Although the birth of children did not have a statistically significant effect on the number of steps in men, changes were also observed in men.

"With the birth of both the first and second child, the trend of aerobic steps declined in men," says postdoctoral researcher Kasper Salin. "However, with the birth of the second child, the number of everyday steps began to rise. This can be explained by, for example, a decrease in exercise hobbies."

Aerobic steps are movements of longer duration, lasting at least 10 minutes, with a step rate of at least 60 steps per minute. Aerobic steps are important for, among other things, heart health. The adult population should have at least 150 minutes of moderate to vigorous exercise per week. Everyday steps describe other active movement on a daily basis.

"Steps can accumulate many times during the day if we just allow," Salin explains it. "To increase your number of steps, you may not have to exercise separately each day. Instead, attention should be paid to everyday choices and, for example, choose stairs instead of the elevator or walk to the store instead of driving."

Where we live influences the amount of physical activity

The study also examined the impact of one's place of residence and of changing it. Moving from the city to the countryside reduced the overall steps and everyday steps of women, but no similar effect was observed for men. For men living permanently in rural areas, both aerobic steps and total steps were at a lower level than those of men living permanently in the city.

The researchers also found that in women, employment reduced aerobic steps.

"Work provides a rhythm for the day and this can influence how, for example, it is possible to participate in various scheduled hobbies," Salin says. "However, it should be noted that the change in total steps was not statistically significant among the employed, as the change in everyday steps was correspondingly positive for those who were employed.

The importance of physical activity for health is well known, but longer-term observations of how changes in life are related to physical activity have so far relied only on self-reported exercise.

Credit: 
University of Jyväskylä - Jyväskylän yliopisto

True identity of mysterious gamma-ray source revealed

image: Artist's impression of PSR J2039?5617 and its companion. The binary system consists of a rapidly rotating neutron star

Image: 
Knispel/Clark/Max Planck Institute for Gravitational Physics/NASA GSFC

An international research team including members from The University of Manchester has shown that a rapidly rotating neutron star is at the core of a celestial object now known as PSR J2039?5617

The international collaboration used novel data analysis methods and the enormous computing power of the citizen science project Einstein@Home to track down the neutron star's faint gamma-ray pulsations in data from NASA's Fermi Space Telescope. Their results show that the pulsar is in orbit with a stellar companion about a sixth of the mass of our Sun. The pulsar is slowly but surely evaporating this star. The team also found that the companion's orbit varies slightly and unpredictably over time. Using their search method, they expect to find more such systems with Einstein@Home in the future.

Searching for the so-called 'Spider' pulsar systems - rapidly spinning neutron stars whose high-energy outflows are destroying their binary companion star, required 10 years of precise data. The pulsars have been given arachnid names of 'Black widows' or 'Redbacks', after species of spider where the females have been seen to kill the smaller males after mating.

New research published in, Monthly Notices of the Royal Astronomical Society, details how researchers found a neutron star rotating 377 times a second in an exotic binary system using data from NASA's Fermi Space Telescope.

The astronomer's findings were uniquely boosted by the Einstein@Home project, a network of thousands of civilian volunteers lending their home computing power to the efforts of the Fermi Telescope's work.

The group's search required combing very finely through the data in order not to miss any possible signals. The computing power required is enormous. The search would have taken 500 years to complete on a single computer core. By using a part of the Einstein@Home resources it was done in 2 months.

With the computing power donated by the Einstein@Home volunteers, the team discovered gamma-ray pulsations from the rapidly rotating neutron star. This gamma-ray pulsar, now known as J2039?5617, rotates about 377 times each second.

"It had been suspected for years that there is a pulsar, a rapidly rotating neutron star, at the heart of the source we now know as PSR J2039?5617," says Lars Nieder, a PhD student at the Max Planck Institute for Gravitational Physics (Albert Einstein Institute; AEI) in Hannover. "But it was only possible to lift the veil and discover the gamma-ray pulsations with the computing power donated by tens of thousands of volunteers to Einstein@Home," he adds.

The celestial object has been known since 2014 as a source of X-rays, gamma rays, and light. All evidence obtained so far pointed at a rapidly rotating neutron star in orbit with a light-weight star being at the heart of the source. But clear proof was missing.

The first step to solving this riddle were new observations of the stellar companion with optical telescopes. They provided precise knowledge about the binary system without which a gamma-ray pulsar search (even with Einstein@Home's huge computing power) would be unfeasible.

The system's brightness varies during an orbital period depending on which side of the neutron star's companion is facing the Earth. "For J2039-5617, there are two main processes at work," explains Dr. Colin Clark from Jodrell Bank Centre for Astrophysics, lead author of the study. "The pulsar heats up one side of the light-weight companion, which appears brighter and more bluish. Additionally, the companion is distorted by the pulsar's gravitational pull causing the apparent size of the star to vary over the orbit. These observations allowed the team to get the most precise measurement possible of the binary star's 5.5-hour orbital period, as well as other properties of the system."

With this information and the precise sky position from Gaia data, the team used the aggregated computing power of the distributed volunteer computing project Einstein@Home for a new search of about 10 years of archival observations of NASA's Fermi Gamma-ray Space Telescope. Improving on earlier methods they had developed for this purpose, they enlisted the help of tens of thousands of volunteers to search Fermi data for periodic pulsations in the gamma-ray photons registered by the Large Area Telescope onboard the space telescope. The volunteers donated idle compute cycles on their computers' CPUs and GPUs to Einstein@Home.

The new knowledge of the frequency of the gamma-ray pulsations also allowed collaborators to detect radio pulsations in archival data from the Parkes radio telescope. Their results, also published in Monthly Notices of the Royal Astronomical Society, show that the pulsar's radio emission is often eclipsed by material that has been blown off the companion star by its nearby Redback pulsar.

Credit: 
University of Manchester

CDDEP's report 'The State of the World's Antibiotics' highlights the growing threat of AMR

Washington, DC / New Delhi, India - Researchers at CDDEP have released, The State of the World's Antibiotics in 2021, which presents extensive data on global antimicrobial use and resistance as well as drivers and correlates of antimicrobial resistance, based on CDDEP's extensive research and data collection through ResistanceMap, a global repository that has been widely used by researchers, policymakers, and the media.

Since the first State of the World's Antibiotics report in 2015, antimicrobial resistance has leveled off in some high-income countries but continues to rise in many low- and middle-income countries (LMICs), where access to antibiotics has risen with increases in gross domestic product per capita. Per capita antibiotic consumption in LMICs is lower than in high-income countries, despite a higher infectious disease burden; however, consumption rates are rapidly converging. These trends reflect both better access to antibiotics for those who need them and increases in inappropriate antibiotic use.

An important driver of resistance is antibiotic use in humans and in terrestrial and aquatic animals raised for human consumption. Global antibiotic consumption in humans increased by 65 percent between 2000 and 2015, whereas consumption in animals is expected to increase by 11.5 percent between 2017 and 2030. If nothing changes to alter these trajectories, antibiotic consumption is likely to increase worldwide by 200 percent between 2015 and 2030.

The approaches to addressing AMR are to reduce the need for antibiotics (through prevention of infections), to reduce the use of antibiotics (by better use of diagnostics and antibiotic stewardship), and to innovate to find new methods of disease prevention and treatment. All three strategies are needed so that a strong arsenal of effective antibiotics can be maintained.

This report introduces country-level dashboards that capture progress on indicators that track AMR and show what remains to be done to decrease the need for antibiotics and their inappropriate use.

"We are optimistic that future generations will also witness the miracle of antibiotics. To ensure that privilege, it is incumbent on us to treat the crown jewels of modern medicine with care and respect," said Dr. Laxminarayan, Director at CDDEP.

The State of the World's Antibiotics in 2021 is published in CDDEP's website and is available for download here: https://cddep.org/blog/posts/the-state-of-the-worlds-antibiotics-report-in-2021/

It is being launched at a global webinar featuring Dame Sally Davies, and Professors Otto Cars, Abdoulaye Djimde, and Ramanan Laxminarayan.

Credit: 
Center for Disease Dynamics, Economics & Policy

Maternal mental health needs attention during COVID-19 lockdowns

Mothers are at increased risk of mental health problems as they struggle to balance the demands of childcare and remote working in COVID-19 lockdowns, according to new research from an international team of researchers.

The findings, published in the journal Psychological Medicine, were drawn from a comprehensive, online survey of mothers in China, Italy and the Netherlands.

Changes to their working lives, family strife and loss of social networks emerged as common factors affecting the mental health of mothers in all three countries.

The study was carried out by a team from Radboud University, Peking University, Tilburg University, Vrije Universiteit Amsterdam, and Padua University, to compare the factors affecting and protecting mothers' metal health in lockdown across countries and cultures.

A total of 900 Dutch, 641 Italian, and 922 Chinese mothers with children aged between one and 10 years participated in the study and reported on their mental health, family functioning, the support they received, and their demographic characteristics during the first lockdown in April and May 2020.

The researchers found women in all three countries shared three big risk factors: changes to work through unemployment, reduced job security and the shift to remote working; marital problems and conflict with other family members, and what the researchers called pandemic-related distress, caused by reduced access to food and essentials, healthcare and social networks.

There were also smaller risks to mental health, which differed across the three countries.

In the Netherlands, unemployed mothers reported high levels of mental health problems, possibly because of financial insecurity. At the same time, highly educated Dutch mothers also reported more symptoms. The researchers suggest this may be because of the need to combine demanding work, often remotely, with child care responsibilities.

In China, highly educated or high income mothers, single mothers, and mothers with poor physical health all reported more mental health symptoms, while in Italy, lower maternal age and poor physical health emerged as risk factors.

Regardless of country, the researchers found mothers who were more resilient and generally able to cope effectively with stressful events experienced lower mental health problems during the lockdown. In China, a large number of children as well as support in childcare from grandparents living in the same household decreased the risk of mental health problems. The researchers conclude that an extended family may be a source of resilience as the unexpected burden of the pandemic is shared among more people.

Dr Madelon Riem, from Radboud University, said: "With closures of schools and day care centres, COVID-19 continues to drastically impact the lives of parents. The burden of the pandemic may be disproportionality placed on women who are still often the primary caregiver. Mothers are, therefore, at increased risk for mental health problems."

Her colleague, Jing Guo, from Peking University, said: "These findings may inform future interventions aimed at improving maternal mental health during future pandemics. For instance, the current lockdown policies may ignore the advantages of grandparental childcare that support mother's mental health, as shown in China.

"Families without grandparental support show a clear need of childcare facilities during lockdowns. Improving maternal mental health not only benefits mothers, but also their children. For mothers who are disproportionately burdened by the pandemic, good mental health may be a necessary prerequisite for providing adequate care of their children."

Credit: 
Cambridge University Press

An innovative and non-destructive strategy to analyse material from Mars

image: Image of the distribution of certain elements from one of the meteorites analysed by the group

Image: 
IBeA / UPV/EHU

The IBeA research group from the University of the Basque Country's Department of Analytical Chemistry, Faculty of Science and Technology, is participating in NASA's Mars2020 space mission, which is scheduled to touch down on Mars in February this year. Specifically, the group has participated in constructing and verifying the chemical homogeneity of the templates included on the calibration card of the SuperCam instrument mounted on the Perseverance. 'We made a set of pads perfectly characterised in accordance the instruments we have here, in order to enable us to verify that the LIBS and Raman spectroscopy measurements taken by the SuperCam are correct,' explains Doctor Cristina García-Florentino. 'Raman spectroscopy is a technique for determining the molecular composition of unknown samples,' she continues. 'In other words, not only can we determine, for example, whether the sample contains calcium or iron, etc., we can also identify the molecular form in which they are present. Thus, we can see whether they contain calcite or gypsum, for example. We can determine the geochemical composition of the planet'.

At the same time, the research group is also working on characterising meteorites, with a twofold objective: 'Firstly, to get ready for the information that may be sent from Mars by the Perseverance rover; and secondly, to develop non-destructive analytical strategies for characterising Martian samples from the return mission (Mars Sample Return mission) when it reaches Earth'. To date, Martian meteorites have been the only Martian samples available for developing different analysis methods. In a recent study, the group has proposed an innovative non-destructive analytical strategy that could be added to the current arsenal of fast analysis techniques which can be used with future samples.

To demonstrate its capabilities, the group has used their analytical proposal to 'characterise the Martian meteorite Dar al Gani 735, with the aim of identifying the terrestrial and non-terrestrial alterations suffered by it, as a very valuable complementary methodology to the more traditional petrographic analyses,' explains Dr García-Florentino.

Access may be uncertain

In the researcher's opinion, 'this study demonstrates the potential of Raman spectroscopy as a key technique in the new upcoming explorations of Mars materials by the Rosalind Franklin rover (the ESA's Exomars2022 mission) and the Perseverance rover (NASA's Mars2020 mission), on which Raman spectrometers will be mounted for the first time in an extra-terrestrial research mission in the field'. According to Dr García-Florentino, the technique is important 'because, once we have samples brought back directly from Mars, we cannot destroy them to analyse them in the initial stages of study. It is therefore important to be ready for when the Martian samples arrive, in order to gain as much information from them as possible, with the fewest possible errors and trying to destroy them as little as possible'.

Nevertheless, the researcher warns that access to the information and to the samples themselves will be difficult: 'We still do not know whether we will be granted access to the samples, whether they will allow us to analyse them as we propose here with the techniques we have developed'. Meanwhile, the IBeA group will continue its work, 'because each meteorite is a world unto itself; each meteorite is totally different from all others'.

Credit: 
University of the Basque Country

Research findings can help to increase population size of endangered species

The findings of a new study examining the behaviours of alligator and caiman hatchlings have enhanced our understanding of how we can conserve, and increase, the population of endangered crocodilian species.

At adult size, there are key differences between the American alligator and the closely related spectacled caiman. However, at the time of hatching both species are tiny and might be expected to show similar behaviours in order to avoid being eaten by almost any carnivore around.

Now, researchers at the Universities of Lincoln and Vienna have conducted comparative studies between the hatchlings of these crocodilian creatures and found that the alligators are more active and likely to explore their surroundings.

The research, conducted at 'Crocodiles of the World', the only zoo in the UK specialising in keeping crocodilians, put American alligator and spectacled caiman hatchlings in unknown environments and presented them with unknown objects.

The team found that the alligators moved around much more than the caimans in all conditions and approached the unknown objects closer than the caimans, behaviour which may reflect the strength of maternal protection they receive.

Anna Wilkinson is Professor of Animal Cognition at the University of Lincoln, UK, and final author of the study. She said: "The findings of this study are exciting as they have important conservation implications.

"Several crocodilian species are endangered in the wild and one way to increase their population size is to release captive-bred juveniles into the wild. If the endangered species is a large crocodilian and at the top of the food chain, the juveniles should be allowed to grow to a larger size prior to release as they might have a lower natural predator avoidance.

"On the flip side, spectacled caimans are an invasive species in the natural range of other crocodilians, including the American alligator, and one reason for their success could be a higher survival rate of their hatchling because of their stronger tendency to avoid predators."

First author Dr Stephan Reber, said: "During our research, the movements of the animals were coded automatically using a colour tracking software developed specifically for this study.

"We used automatic coding because it allows us to catch even very small differences in behaviour. The observed behavioural tendencies of the hatchlings are very reminiscent of those of adults. Adult American alligators are rather self-assured and confident, while adult spectacled caimans are, in comparison, a bit jumpier and more easily spooked."

Hatchlings of the two species are probably equally susceptible to predators due to their similar size, but the researchers suggest that the different behaviour observed in the hatchlings is a reflection of the strength of maternal protection.

All crocodilians are guarded by a parent (usually the mother) for a considerable amount of time after hatching. The strength of that protection depends on the adult size of the parents.

Dr Reber explains: "American alligator mothers have no natural enemies in their habitat and can protect their hatchlings effectively against any predator. On the other hand, adult spectacled caimans have many predators, including cougars, jaguars and giant snakes. Therefore, American alligator hatchlings can afford to be more explorative under their mother's watchful eye, while spectacled caimans probably behave more inconspicuously to avoid attracting attention even if they are guarded."

Credit: 
University of Lincoln

Aging-US: Sulforaphane promotes C. elegans longevity and healthspan

image: Sulforaphane delays age-associated physiological decline. (A) L4 larvae were exposed to 100 μM sulforaphane (SF) or not (CO), and 20 worms per group were used for evaluation. Pharyngeal pumping was measured on days 6, 9 and 12 by the evaluation of the opening of the corpus (anterior pharynx, green arrow, image on the right) and the terminal bulb (red arrow), which contract and relax synchronously during pharyngeal pumping. The pump frequency per minute was calculated and is shown in the diagram on the left. (B) In L4 larvae treated as described above, the number of body bends (images on the right) per minute was evaluated (diagram on the left) to assess mobility. (C) At day 12 after sulforaphane treatment, blue autofluorescence, representing lipofuscin accumulation (images on the right), was detected by fluorescence microscopy. The blue autofluorescence in the figure indicates the accumulation of lipofuscin. The relative fluorescence intensity was evaluated by using ImageJ software, and the fluorescence of the untreated nematodes was set as 1. The scale bar indicates 0.1 mm. (D) L4 larvae were treated with sulforaphane (SF) or not (CO). Twenty-four hours later (Day 1), the number of eggs laid was counted under the microscope daily for 7 days. The number of eggs laid each day and the total number of eggs are shown in the diagram on the left. The green arrow in the diagram on the right indicates eggs in a worm, and the red arrow indicates eggs that are being laid by the worm. The data are shown as the mean ± SD as evaluated by Student's t test using Prism 6.0. *P

Image: 
Correspondence to: Ingrid Herr email: i.herr@uni-heidelberg.de

Aging-US published "Sulforaphane promotes C. elegans longevity and healthspan via DAF- 16/DAF-2 insulin/IGF-1 signaling" which reported that the broccoli-derived isothiocyanate sulforaphane inhibits inflammation, oxidative stress and cancer, but its effect on healthspan and longevity are unclear.

The authors used the C. elegans nematode model and fed the wildtype and 9 mutant strains ±sulforaphane.

Sulforaphane increased the lifespan and promoted a health-related phenotype by increasing mobility, appetite and food intake and reducing lipofuscin accumulation.

Mechanistically, sulforaphane inhibited DAF-2-mediated insulin/insulin-like growth factor signaling and its downstream targets AGE-1, AKT-1/AKT-2. This was associated with increased nuclear translocation of the FOXO transcription factor homolog DAF-16. In turn, the target genes sod-3, mtl-1 and gst-4, known to enhance stress resistance and lifespan, were upregulated.

The results in this Aging-US research output, indicate that sulforaphane prolongs the lifespan and healthspan of C. elegans through insulin/IGF-1 signaling. They provide the basis for a nutritional sulforaphane-enriched strategy for the promotion of healthy aging and disease prevention.

Dr. Ingrid Herr from The University of Heidelberg said, "The risk of cancer, cardiovascular disease, and neurodegeneration rises dramatically later in life."

Pak choy, which is one of the most widely consumed Brassica vegetables in Asian countries, have been reported to enhance antioxidant activity in a cell-free system and exert anti-aging effects in the nematode Caenorhabditis elegans.

C. elegans is one of the most widely used models for aging research due to its short lifespan of approximately 4 weeks and highly conserved key aging-related signaling molecules .

Here, the authors asked whether sulforaphane may influence the lifespan and healthspan of C. elegans.

They found that sulforaphane significantly extends the lifespan of C. elegans and delays age-related phenotype changes.

The analysis of wild-type C. elegans and 9 mutant strains revealed that sulforaphane inhibited DAF-2 insulin/insulin receptor signaling and thereby increased DAF-16 nuclear translocation, resulting in the expression of the sod-3, mtl-1 and gst-4 target genes, which are known mediators of longevity in C. elegans.

The Herr Research Team concluded in their Aging-US Research Paper, "we are the first to report that sulforaphane prolongs the lifespan and increases the healthspan of C. elegans through the inhibition of DAF- 2/insulin/IGF-1 signaling and the activation of DAF- 16/FOXO nuclear transcription in C. elegans. Our study provides a promising hint regarding the suitability of sulforaphane as a new anti-aging drug. However, additional studies in invertebrates and mammalian model organisms are necessary to expand our findings."

Credit: 
Impact Journals LLC

Sneakerheads, not hypebeasts: Defining a sneaker-driven sub-culture

Sneakers can be about style, history and even community. A new study reveals that for "Sneakerheads," sneakers are an important facet of their identities, particularly for African-American men who grew up in the 1970s and '80s coveting sneakers popularized by hip-hop stars and basketball legends.

In the journal Fashion and Textiles, researchers report new insights into the motivations, brand preferences and identity considerations of Sneakerheads. The findings were drawn from interviews with 12 men in the mid-Atlantic region of the United States, many whom are African-American, and all whom self-identified as Sneakerheads. The findings help inform marketing efforts, and help fill a void in academic literature on the topic.

"As a researcher who looks at consumer behavior and trends that apply to my industry in fashion and apparel, any sort of trend that's out there getting a lot of attention, I'm drawn to," said the study's lead author Delisia Matthews, assistant professor of textile brand management and marketing at North Carolina State University's Wilson College of Textiles. "I want to know the 'why' behind a trend. What's motivating people to go after a particular trend? What are the drivers and the brand preferences?"

In the article, researchers described the history of Sneakerhead sub-culture and defined what it means to be one: to have a strong interest in sneaker history, to seek out rare and exclusive sneaker collections and to admire, collect - and sometimes re-sell - sneakers.

Based on the interviews, three themes emerged about the motivations and preferences of Sneakerheads. The first theme, which the researchers called "Back in the Day," references the importance of history to Sneakerheads. Matthews said many Sneakerheads trace the origin of the movement to the 1970s and '80s, when sneakers were popularized by basketball icon Michael Jordan, and also by hip-hop stars who were known not just for their unique rhythms, rhymes and lyrics, but also for their style or their "swag."

"I think one of the key pivotal groups that focused on sneakers would be Run-DMC," Matthews said. "One of the shoes they made popular were the Adidas Shell Toes. It was a staple, and they even made a song about it. People were paying attention not only to what was coming out of their mouths, but also what they were wearing."

The second theme, "All About the Jumpman," references the importance of Jordan and the release of the Nike Air Jordan 1s in 1985. The logo is called the "Jumpman," and Matthews said the Nike Air Jordan 1s are, "the gateway into being a Sneakerhead."

"When Michael Jordan came out with his shoes, because he was such a pivotal figure and his performance was like no other, people wanted to be like Mike, and wanted to wear his shoes," she said. "With his notoriety, and what he stood for in the African-American community in that time, people just wanted to have those shoes to emulate what he stood for, and his performance. A lot of my participants that we talked to, when we talked about the nostalgia piece - it related to Michael Jordan."

In addition to basketball shoes, there are some other athletic shoes that are noteworthy, such as the Adidas Ultraboost running shoe, as well as celebrity collaborations. Matthews said celebrity collaborations are especially important for many younger Sneakerheads.
They last theme, which Matthews said was the most surprising, was called "For Members Only." They found a common trend among study participants to feel a sense of community and also exclusivity in regard to Sneakerhead sub-culture. And while they felt connected to other Sneakerheads who understand and respect the history and culture of sneakers, they also expressed an "us versus them" attitude toward others they called "Hypebeasts." Hypebeasts were described as people who hop on sneaker trends or are just interested in the resale value of the shoes.

The researchers also found that for many Sneakerheads, sneakers are important to their social identities, which is the concept of being self-related to the groups they belong to. Matthews said sneakers are part of how Sneakerheads connect. They share norms, practices and even a vocabulary, such as the term "drops," which references the release date for a certain shoe, and "color way," which is the particular color scheme a shoe might come in.

"The lightbulb came on for me when one participant told me, when he goes to an event, he doesn't make eye contact first," she said. "He makes shoe contact first, meaning: 'I'm looking to see what kind of shoes you have, how you're matching it. That lets me know you're my kind of people.' It's definitely a way that they connect, it's a way that they are able to look to see if those people are part of their group memberships or not."

Matthews said the findings are important because they could help brands better understand and serve their consumers. They could also help to eliminate misconceptions about Sneakerheads, she said.

"Sometimes when we see trends, people make this huge assumption that these are people who can't control their spending habits, or they're being wasteful," she said. "But when you dig into it, it's deeper than that. It has to do with identity, and nostalgia. I could be the voice of the consumer, and really advocate for them, and understand their motivations - getting past assumptions that people might make."

In future studies, Matthews plans to explore brand preferences and interests of female Sneakerheads, who are also an important market for brands to consider.

Credit: 
North Carolina State University

How modern robots are developed

Today, neuroscience and robotics are developing hand in hand. Mikhail Lebedev, Academic Supervisor at HSE University's Centre for Bioelectric Interfaces, spoke about how studying the brain inspires the development of robots.

Robots are interesting to neuroscience and neuroscience is interesting to robots - this is what the article 'Neuroengineering challenges of fusing robotics and neuroscience' was about in the journal Science Robotics. Such collaborative development contributes to progress in both fields, bringing us closer to developing more advanced android robots and a deeper understanding of the structure of the human brain. And, to some extent, to combining biological organisms with machines, to create cybernetic organisms (cyborgs).

Neuroscience for Robots

Robots often resemble humans in their make-up. This is true for robots that are meant to mimic human actions and behaviour - neuroscience is less important to industrial machines.

The most obvious thing to use in the design of a robot is to make it look human. Robots often have two arms, two legs and a head, even if it is not necessary from an engineering point of view. This is especially important when the robot will interact with people - a machine that looks like us is easier to trust.

It is possible to ensure that not only the appearance, but also the 'brain' of the robot resembles that of a human. In developing the mechanisms for perception, information processing, and control, engineers are inspired by the structure of the human nervous system.

For example, a robot's eyes -- TV cameras that can move on different axes -- mimic the human visual system. Based on the knowledge of how human vision is structured and how the visual signal is processed, engineers design the robot's sensors according to the same principles. In this way the robot can be endowed with the human ability to see the world in three dimensions, for example.

Humans have a vestibulo-ocular reflex: the eyes apply stabilisation using vestibular information when we move, allowing us to maintain the stability of the picture we see. There may also be acceleration and orientation sensors on a robot's body. These help the robot to take body movements into account to stabilise the visual perception of the outside world and improve agility.

In addition, a robot can experience the sense of touch just like a human - a robot can have skin, it can feel touched. And then it doesn't just move randomly in space: if it touches an obstacle, it senses it and reacts to it just like a human does. It can also use this artificial tactile information to grip objects.

Robots can even simulate sensations of pain: some forms of physical contact feel normal and some cause pain, which drastically changes the robot's behaviour. It starts to avoid pain and develop new behaviour patterns, i.e. it learns - like a child who has been burned by something hot for the first time.

Not only sensory systems, but also a robot's body control can be designed analogously to that of humans. In humans, walking is controlled by so-called central rhythm generators -- specialized nerve cells designed to control autonomous motor activity. There are robots in which the same idea is used to control walking.

In addition, robots can learn from humans. A robot can perform actions in an infinite number of ways, but if it wants to mimic a human, it must observe the human and try to repeat their movements. When it makes mistakes, it compares itself with how a human performs the same action.

Robots for Neuroscience

How can neuroscience use robots? When we build a model of a biological system, we begin to better understand the principles by which it works. Therefore, developing mechanical and computer models of human nervous system movement control brings us closer to understanding neurological functions and biomechanics.

And the most promising area of using robots in modern neuroscience is in designing neurointerfaces -- systems for controlling external devices using brain signals. Neurointerfaces are necessary for the development of neuroprostheses (for example, an artificial arm for people who have lost a limb) and exoskeletons - external frames or skeletons for a human body to increase its strength or restore lost motor ability.

A robot can interact with the nervous system through a bi-directional interface: the nervous system can send a command signal to the robot, and the robot from its sensors can return sensory information to the human, causing real sensations by stimulating nerves, nerve endings in the skin, or the sensory cortex itself. Such feedback mechanisms make it possible to restore the sensation of a limb if it has been lost. They are also necessary for more precise movements of the robotic limb, since it is on the basis of sensory information received from the arms and legs that we correct our movements.

There is an interesting question that arises here: Should we control all degrees of freedom of the robot through a neural interface? In other words, how should we send specific commands to it? For example, we can 'order' the robotic arm to pick up a bottle of water, and it will perform specific operations: it will lower its arm, turn it, and unclench and clench the fingers on its hand - all on its own. This approach is called combined control - we give simple commands through a neural interface, and a special controller inside the robot selects the best strategy for implementation. Or we can create a mechanism that will not understand the 'take the bottle' command: it needs to be sent information about specific, detailed movements.

Current Studies

Neuroscientists and robotic scientists study various aspects of brain operation and robotic devices. For example, at Duke University I conducted experiments with neural interfaces on monkeys, since interfaces need to be directly connected to brain areas for them to work accurately and such experimental interventions are not always possible to be performed on humans.

In one of my studies, a monkey walked along a path and the activity of its motor cortex, which is responsible for leg movement, was read and triggered a robot to start walking. At the same time, the monkey observed this walking robot on a screen placed in front of it.

The monkey used feedback, so it corrected its movements based on what it saw on the screen. This is how the most effective neural interfaces for implementing walking are developed.

The Cybernetic Future

Such research leads us to innovative developments in the future. For example, creating an exoskeleton to restore the movements of completely paralysed people no longer seems like an unattainable fantasy - it just takes time. Progress may be held back by the lack of computer power, but development over the past ten years has also been enormous here. It is likely that we will soon see people around us using light, comfortable exoskeletons rather than wheelchairs or strollers to get around. Human cyborgs will become commonplace.

Commercial development of such systems is taking place all over the world, including in Russia. For example, the famous ExoAtlet project is developing exoskeletons for the rehabilitation of people with motor disabilities. The HSE Centre for Bioelectric Interfaces participated in the development of algorithms for these machines: Centre Head, Professor Alexey Ossadtchi, and his doctoral students developed a neurointerface that triggers the walking movements of the exoskeleton.

The rapid development of humanoid robots is also becoming a reality. It is likely that we will soon have robots walking around imitating us in many respects - moving like us and thinking like us. They will be able to do some of the work previously available only to humans.

Obviously, we will see the development of both robotics and neuroscience, and these fields will converge. This not only opens up new opportunities, but also creates new ethical questions, such as how we should treat android robots or human cyborgs.

And yet, so far, humans are better than robots in many ways. Our muscles are the most economical: eat a sandwich and you will have enough energy for the whole day. The robot will have a flat battery in half an hour. And although it may be much more powerful than a human, it is often too heavy. When it comes to elegance and energy capacity optimisation - so far, a human is still superior to a robot.

It is not far into the future when this will change - there are tens of thousands of talented scientists and engineers working towards this goal.

Credit: 
National Research University Higher School of Economics

The business of bees

image: Vikas Khanna, Wellington C. Carl Faculty Fellow and associate professor of civil and environmental engineering at Pitt's Swanson School of Engineering

Image: 
University of Pittsburgh

The economic value of insect pollinators was $34 billion in the U.S. in 2012, much higher than previously thought, according to researchers at the University of Pittsburgh and Penn State University. The team also found that areas that are economically most reliant on insect pollinators are the same areas where pollinator habitat and forage quality are poor.

"Pollinators like bees play an extremely important role in agriculture," explained senior author Vikas Khanna, Wellington C. Carl Faculty Fellow and associate professor of civil and environmental engineering at Pitt's Swanson School of Engineering. "The insects that pollinate farmers' crops underpin our ecosystem biodiversity and function, human nutrition, and even economic welfare."

But some of those busy little bees are headed for crisis--one-third of managed honey bee colonies die each winter in the U.S., and populations of many wild pollinator species are showing declines as well.

Using publicly available price and production data and existing pollination field studies, the team determined economic dependence of U.S. crops on insect pollination services at the county level, as well as areas where the habitat for wild pollinators has been reduced. One key finding is that the economic value that is dependent on insect pollination totaled $34 billion in 2012, much higher than previously thought. The team looked at 2012 because it was the most recent year for which data were available.

"The value of insects as part of our economy is apparent when you look at the well-established connection between farming and beekeeping. Farmers sometimes will buy or rent bee colonies to help pollinate their crops when there aren't enough wild bees in the area," said Khanna. "We've found that some of the areas that are economically most reliant on insect pollinators are the same areas where pollinator habitat and forage quality are poor."

The researchers found that 20 percent of U.S. counties produce 80 percent of total economic value that can be attributed to wild and managed pollinators. Their findings will inform conservation efforts and ensure sustainable production of key crops.

They also identified the key areas that produce economically and nutritionally valuable crops and are highly dependent on pollinators--areas that are at risk if wild pollinator populations continue to decline. By overlaying maps of predicted wild bee abundance, the researchers could identify areas where there was high economic dependence on pollinators but low predicted abundance of pollinators.

The research suggests a need for farmers to mitigate the shrinking bee populations by providing a more suitable habitat for the insects to thrive.

"Our study showcases the increasing importance of pollinators to supporting U.S. agricultural systems, particularly for the foods that are vital for healthy diets, like fruits, vegetables and nuts," says Christina Grozinger, Publius Vergilius Maro Professor of Entomology and director of the Center for Pollinator Research at Penn State.

"This detailed map of pollination needs and pollinator deficits helps identify regions where resources could be provided to improve pollinator habitat, as well as other regions where local land use practices are supporting both agriculture and healthy pollinator populations. Those places could serve as models for sustainable agriculture and pollinator conservation practices."

Credit: 
University of Pittsburgh

Ground-breaking evidence reveals scalp cooling physically protects hair follicles

video: Paxman Scalp Cooling Limited and the University of Huddersfield signed a five-year research and collaboration agreement covering the PAXMAN Scalp Cooling Research Centre (PSC), a multi-disciplinary research group based at the University. The Centre has been focusing on biological hair follicle research as well as developing innovative scalp cooling-related treatments and individual 3D-printed cooling caps. In the video, the University's Dr Nik Georgopoulos explains the science behind scalp cooling.

Image: 
University of Huddersfield and Paxman

GROUND-BREAKING research from the University of Huddersfield, announced ahead of World Cancer Day 2021, proves that scalp cooling physically protects hair follicles from chemotherapy drugs. It is the world's first piece of biological evidence that explains how scalp cooling actually works and the mechanism behind its protection of the hair follicle.

The study, entitled 'Cooling-mediated protection from chemotherapy drug-induced cytotoxicity in human keratinocytes by inhibition of cellular drug uptake', has been published in the peer-reviewed journal PLOS ONE .

The data was part of an innovative hair follicle research project carried out by the dedicated Scalp Cooling Research Centre based at the University of Huddersfield. It involved the cultivation of cells isolated from human hair follicles in the lab.

The £1 million Scalp Cooling Research Centre was established at the University in 2019 with the backing of Huddersfield firm Paxman - global leaders in scalp cooling technology.

The team of experts in biology and design technology have been working together with the aim of Paxman becoming the only hair loss-preventing scalp cooling provider firmly based on biological research. It also brings the family-run business one step closer to achieving in its vision of 'zero hair loss' for cancer patients undergoing chemotherapy treatment.

Chemotherapy works by targeting all rapidly dividing cells in the body. Hair is the second fastest dividing cell, and this is the reason why many chemotherapy drugs cause alopecia. The hair follicles in the growth phase are attacked, resulting in hair loss approximately two weeks after the commencement of chemotherapy treatment.

Co-director of the centre and lead author of the journal article is Dr Nik Georgopoulos, a cancer expert at the University's Department of Biological Sciences who has collaborated with Paxman since 2011.

"Scalp cooling is currently the only treatment to combat 'chemotherapy-induced alopecia', yet little is known about its cytoprotective effect on human hair follicles," said Dr Georgopoulos.

Before now, he explained, the most common and obvious presumption to describe how scalp cooling worked was that as the scalp is cooled, the veins become constricted thereby reducing the amount of blood flow, meaning less of the chemotherapy drug enters the hair follicle.

"However, this is a really exciting discovery because our research now shows it is not as simple as that. We were able to measure how much chemotherapy drug goes into the cultured cells from hair follicles and what we have found is that cooling actually dramatically reduces the amount of chemotherapy drug being absorbed by the rapidly-diving cells of the hair follicle," he added.

This means there is now evidence for the first time, which demonstrates cooling has a direct effect on reducing the amount of drug that goes in and is not an indirect effect as thought before with the restricted blood flow.

"Our results provide evidence that attenuation of cellular drug uptake represents at least one of the mechanisms underpinning the ability of cooling to rescue human keratinocytes from chemotherapy drug-cytotoxicity, thus supporting the clinical efficacy of scalp cooling," he added.

In addition to providing evidence of how the treatment works, the Centre has also been working on developing innovative scalp cooling-related treatments and individual 3D-printed cooling caps. This has involved a collaboration of researchers from across two of the University's schools of study, the School of Applied Sciences and the School of Art, Design and Architecture.

"This latest project builds upon our previous research," continued Dr Georgopoulos.

"We had already demonstrated that if you cool at just 3 or 4 degrees lower, this can be the difference between the cells surviving or dying. We have now shown that a few degrees in temperature can also mean a more dramatic reduction in chemotherapy drug uptake by cells.

"The more evidence we can provide, the more data the designers have to facilitate the design of a better a cap. A better fit could mean more of a reduction in temperature, so more effective cooling means more survival of the follicles, leading to a better outcome."

The percentage of hair loss can be further reduced when scalp cooling is combined with the application of a topical agent. One of the Centre's tasks has been to develop the best way to deliver this agent to hair follicles on the scalp.

Richard Paxman, CEO of Paxman, added: "This latest research brings us one step closer to achieving our vision of 'zero hair loss' for cancer patients undergoing chemotherapy treatment. This is fabulous news and is a ground-breaking step in the field of scalp cooling research."

Credit: 
University of Huddersfield